HPE Adapters - Servers & Synergy Adapters

Do you want to improve your performance and bandwidth without increasing your hardware complexity?

The HPE Synergy 6810C 25/50Gb Ethernet Adapter provides more than two times the bandwidth compared to 10/20Gb adapters. Therefore, it simplifies hardware implementation by reducing the number of adapters, associated switches and compute modules required to achieve higher bandwidth.

The networking acceleration on this adapter alleviates the CPU utilization, increases the number of virtual machines (VMs) placed on each server, and improves the cloud scale efficiency. Pairing with the Hewlett Packard Enterprise Synergy high-density 50G Ethernet switching solution, this adapter provides high throughput and low latency to implement intelligent and flexible networks.

Do you want to improve your performance and bandwidth without increasing your hardware complexity?

The HPE Synergy 6820C 25/50Gb Ethernet Adapter provides more than two times the bandwidth compared to 10/20Gb adapters. Therefore, it simplifies hardware implementation by reducing the number of adapters, associated switches and compute modules required to achieve higher bandwidth.

The networking acceleration on this adapter alleviates the CPU utilization, increases the number of virtual machines (VMs) placed on each server, and improves the cloud scale efficiency. Pairing with the HPE Synergy high-density 50G Ethernet switching solution, this adapter provides high throughput and low latency to implement intelligent and flexible networks.

Do you need low power, high port density 1GbE network adapters for virtualization and server consolidation?

The HPE Ethernet 1Gb 4-port FLR-T BCM5719 Adapter for select HPE ProLiant servers features the next generation of Ethernet integration, offering a single-chip solution in a FlexibleLOM form factor, which offers the option for future upgrades to 10GbE networking speeds. It delivers full line-rate performance across all ports with low power consumption. The adapter is ideal for virtualization, security, server consolidation, network segmentation, and other applications requiring maximum throughput and port density. The total aggregate throughput of 4 Gb meets the needs of customers desiring high bandwidth. The adapter supports advanced features such as Large Send and Receive offload capability, TCP checksum and segmentation, VLAN tagging, MSI-X, jumbo frames, IEEE 1588, HPE Sea of Sensors 3D and virtualization features such as VMware NetQueue and Microsoft VMQ.

Do you have demanding workloads that require low latency? The HPE Ethernet 100Gb 1-port QSFP28 MCX515A-CCAT Adapter supports 100 Gb bandwidth that allows more network traffic and thus is ideal for telcos, cloud and service providers. This adapter has security features to keep out rogue updates that could slow you down. Plan for the future and get in the express lane with the 100 Gb adapter.

Are you looking for an upgrade path to improve Storage Area Network performance for your ProLiant servers?

The HPE SN1610Q 32Gb Fibre Channel Host Bus Adapter (HBA) provides significant I/O performance and security benefits over existing 16 Gb SAN solutions. Even if the SN1610 is introduced into a new ProLiant server, the Fibre Channel standard enables backward compatibility to 16 Gb infrastructure. Additionally, the HPE SN1610Q 32Gb Fibre Channel HBA is forward compatible to 64 Gb and future speeds. The exponential effect of newer servers and infrastructure helps accelerate databases, host more virtual machines, support emerging technologies such as NVMe, and reduce total cost of ownership. The HBA delivers better business outcomes across multiple industry verticals that rely on high-performance, data-intensive, and reliable connectivity from servers to storage.

Need a low cost, low power 1GbE adapter for your HPE ProLiant server?

The HPE Ethernet 1Gb 4-port BASE-T I350-T4V2 Adapter features a single chip solution, further reducing power requirements for 4 ports of 1 Gb Ethernet. The HPE Ethernet 1Gb 4-port BASE-T I350-T4V2 Adapter is PCI Express 2.1 x4 based on the latest Intel Ethernet Controller I350 designed for use with select HPE ProLiant rack, tower and density optimized servers.

Is your remote office, department or company looking to consolidate data spread across multiple HPE ProLiant servers into a highly reliable and affordable SAN?
There are many benefits to a consolidated storage strategy. The HPE SN1100Q 16Gb Host Bus Adapters (HBAs) build a Fibre Channel connection when installed into an HPE ProLiant server and cabled to a switch and storage device.
Multiple physical HPE ProLiant servers and/or virtual servers can be routed using a Fibre Channel switch to an HPE storage array such as the HPE MSA, HPE Nimble Storage or HPE Alletra storage devices. This level of consolidation concentrates storage management on one storage device and provides an equally powerful and reliable connection for each server and its applications. Additionally, an onsite data protection device such as a disk or tape backup can leverage the same Fibre Channel infrastructure helping eliminate slow over-the-network backups.

Is your data center poised to take the 16 Gb step in Fibre Channel (FC) connectivity?

The growth in enterprise flash storage and the deployment of servers with multi-core processors is driving the need for high performance storage networking to prevent application performance bottlenecks. The FC Host Bus Adapter (HBA) is a critical element of this storage network to improve storage performance.

The HPE SN1200E 16Gb Fibre Channel Host Bus Adapters deliver the high bandwidth, low latency and high IOPs to meet any application requirements, from online transaction processing or data warehousing to backup/restore and OpenStack Cinder block storage.

Supporting higher virtual machine density on powerful host servers, the SN1200E 16Gb HBAs delivers increased ROI on enabling more applications and virtual machines to run on a single server and I/O port without impacting SLAs. The 16 Gb FC HBA is backward compatible with 8 and 4 Gb FC storage networks to protect legacy investments.

Do you need an adapter that is big on capability and small on CPU utilization?

The HPE Ethernet 10Gb 2-port 537SFP+ FLR Adapter has been designed to efficiently deliver high performance, low latency an minimal CPU utilization by offloading many I/O processing within the adapter. Low latency dramatically improves application performance and frees up CPU resources in the host allowing it to do tasks that are more important.

Are you looking for a 4 port 1GbE adapter for your HPE ProLiant Server?

The HPE Ethernet 1Gb 4-port FLR-SFP+ I350-T4V2 Adapter features the next generation of Ethernet integration offering in a single chip solution on a FlexibleLOM form factor, further reducing power requirements for 4 ports of 1 Gb Ethernet. The adapter is the PCI Express 2.1 x4 based on the latest Intel Ethernet Controller I350 designed for use with select HPE ProLiant rack and scalable servers. Its FlexibleLOM form factor means customers now have a choice to meet growing infrastructure needs. It supports advanced features such as Large Send offload capability, TCP checksum and segmentation, VLAN tagging, MSI-X, Jumbo frames, IEEE 1588, and virtualization features such as Intel Virtualization Technology for Connectivity, VMware NetQueue, Microsoft VMQ and WOL, and power management technologies like Energy Efficient Ethernet.