2
Image may differ from actual product
HPE SN2100M 100GbE 8QSFP28 Power to Connector Airflow Half Width Switch
HPE SN2100M 100 Gb Ethernet, 8-port SFP28, half-width switch
QuickSpecs
QuickSpecs
QuickSpecs (PDF)
QuickSpecs (HTML)
SKU # Q2F24A
Key Features
Superior Performance with Future-proof Growth
HPE M-series SN2100M Ethernet switches provide predictability within a storage network and consistent throughput regardless of the packet size being transferred, the mixture of ports which are sending data and even within mixed speed environments.
Provides wire-rate performance with zero packet loss across frame sizes, avoiding any negative impact on applications that could occur with frame loss as unexpected packet loss is unacceptable in modern data centers, especially within a storage network.
Capable of forwarding 100% capacity wire rate performance with zero packet loss across ports concurrently at 100 GbE speeds while transferring data across both Layer 2 and Layer 3 networks.
Can be deployed to support 10 GbE ports and is designed to be able to evolve over time to support 25, 50, and 100 GbE speeds. This helps future-proof your network architecture and allows for implementing significant speed changes to the architecture over time.
Enhanced for Storage and Hyperconverged Environments
HPE M-series SN2100M switches provide high-port density in a single rack unit, allowing for higher capacity and efficiency, simplifying scale-out environments and saving on total cost of ownership (TCO). Unique breakout cables fan out individual switch ports to multiple device ports.
With unique form factors and port counts, these Ethernet switches allow two HPE SN2100M units to be deployed side-by-side allowing for increased density, making it the ideal top-of-rack (ToR) switch.
Designed to use less electric power than competing switches, with less than 95W, HPE SN2100M provides one of the industry’s lowest power draws, producing less heat than competing products and allowing reduced OPEX cost.
Unleashes Flash Storage Performance
HPE M-series SN2100M switches provide ultra-low latency of under 300ns port-to-port. This is advantageous for flash storage, which moved latency from storage access to the network, as well as for the burst nature of today’s software-defined and cloud data centers traffic.
Provides enough internal bandwidth that there is sufficient capacity to carry ports at 100 Gbps bandwidth concurrently. This allows the switches to avoid head-of-line blocking which can reduce overall performance and throughput.
Introduces dynamic shared buffers and wire speed performance with no packet loss for predictable data delivery.
QuickSpecs
Related Links
Videos
Whitepaper
SIMILAR ITEMS
Big Switch Networks Big Cloud Fabric Series
The Big Switch Networks Big Cloud Fabric Series is an application that uses hyperscale concepts of scalability, openness and agility to deliver intent-based networking based on SDN controls. By using HPE Altoline open networking switches and 3rd party software, customers may realize up to 50% TCO over legacy networks.
Big Switch Networks Big Cloud Fabric Series delivers zero-touch operations, network automation and deep visibility for data center fabrics and cloud-native applications. Supports physical and virtual workloads and choice of orchestration tools. It provides Layer 2 (L2) switching, L3 routing, and L4-7 service insertion and chaining. The scalable fabric is fully resilient with no single point of failure and supports headless mode operations.
Big Switch Networks Big Cloud Fabric Series
The Big Switch Networks Big Cloud Fabric Series is an application that uses hyperscale concepts of scalability, openness and agility to deliver intent-based networking based on SDN controls. By using HPE Altoline open networking switches and 3rd party software, customers may realize up to 50% TCO over legacy networks.
Big Switch Networks Big Cloud Fabric Series delivers zero-touch operations, network automation and deep visibility for data center fabrics and cloud-native applications. Supports physical and virtual workloads and choice of orchestration tools. It provides Layer 2 (L2) switching, L3 routing, and L4-7 service insertion and chaining. The scalable fabric is fully resilient with no single point of failure and supports headless mode operations.
Big Switch Networks Big Cloud Fabric Series
The Big Switch Networks Big Cloud Fabric Series is an application that uses hyperscale concepts of scalability, openness and agility to deliver intent-based networking based on SDN controls. By using HPE Altoline open networking switches and 3rd party software, customers may realize up to 50% TCO over legacy networks.
Big Switch Networks Big Cloud Fabric Series delivers zero-touch operations, network automation and deep visibility for data center fabrics and cloud-native applications. Supports physical and virtual workloads and choice of orchestration tools. It provides Layer 2 (L2) switching, L3 routing, and L4-7 service insertion and chaining. The scalable fabric is fully resilient with no single point of failure and supports headless mode operations.
Big Switch Networks Big Cloud Fabric Series
The Big Switch Networks Big Cloud Fabric Series is an application that uses hyperscale concepts of scalability, openness and agility to deliver intent-based networking based on SDN controls. By using HPE Altoline open networking switches and 3rd party software, customers may realize up to 50% TCO over legacy networks.
Big Switch Networks Big Cloud Fabric Series delivers zero-touch operations, network automation and deep visibility for data center fabrics and cloud-native applications. Supports physical and virtual workloads and choice of orchestration tools. It provides Layer 2 (L2) switching, L3 routing, and L4-7 service insertion and chaining. The scalable fabric is fully resilient with no single point of failure and supports headless mode operations.
Big Switch Networks Big Cloud Fabric Series
The Big Switch Networks Big Cloud Fabric Series is an application that uses hyperscale concepts of scalability, openness and agility to deliver intent-based networking based on SDN controls. By using HPE Altoline open networking switches and 3rd party software, customers may realize up to 50% TCO over legacy networks.
Big Switch Networks Big Cloud Fabric Series delivers zero-touch operations, network automation and deep visibility for data center fabrics and cloud-native applications. Supports physical and virtual workloads and choice of orchestration tools. It provides Layer 2 (L2) switching, L3 routing, and L4-7 service insertion and chaining. The scalable fabric is fully resilient with no single point of failure and supports headless mode operations.
Big Switch Networks Big Cloud Fabric Series
The Big Switch Networks Big Cloud Fabric Series is an application that uses hyperscale concepts of scalability, openness and agility to deliver intent-based networking based on SDN controls. By using HPE Altoline open networking switches and 3rd party software, customers may realize up to 50% TCO over legacy networks.
Big Switch Networks Big Cloud Fabric Series delivers zero-touch operations, network automation and deep visibility for data center fabrics and cloud-native applications. Supports physical and virtual workloads and choice of orchestration tools. It provides Layer 2 (L2) switching, L3 routing, and L4-7 service insertion and chaining. The scalable fabric is fully resilient with no single point of failure and supports headless mode operations.
Big Switch Networks Big Cloud Fabric Series
The Big Switch Networks Big Cloud Fabric Series is an application that uses hyperscale concepts of scalability, openness and agility to deliver intent-based networking based on SDN controls. By using HPE Altoline open networking switches and 3rd party software, customers may realize up to 50% TCO over legacy networks.
Big Switch Networks Big Cloud Fabric Series delivers zero-touch operations, network automation and deep visibility for data center fabrics and cloud-native applications. Supports physical and virtual workloads and choice of orchestration tools. It provides Layer 2 (L2) switching, L3 routing, and L4-7 service insertion and chaining. The scalable fabric is fully resilient with no single point of failure and supports headless mode operations.
Big Switch Networks Big Cloud Fabric Series
The Big Switch Networks Big Cloud Fabric Series is an application that uses hyperscale concepts of scalability, openness and agility to deliver intent-based networking based on SDN controls. By using HPE Altoline open networking switches and 3rd party software, customers may realize up to 50% TCO over legacy networks.
Big Switch Networks Big Cloud Fabric Series delivers zero-touch operations, network automation and deep visibility for data center fabrics and cloud-native applications. Supports physical and virtual workloads and choice of orchestration tools. It provides Layer 2 (L2) switching, L3 routing, and L4-7 service insertion and chaining. The scalable fabric is fully resilient with no single point of failure and supports headless mode operations.
Big Switch Networks Big Cloud Fabric Series
The Big Switch Networks Big Cloud Fabric Series is an application that uses hyperscale concepts of scalability, openness and agility to deliver intent-based networking based on SDN controls. By using HPE Altoline open networking switches and 3rd party software, customers may realize up to 50% TCO over legacy networks.
Big Switch Networks Big Cloud Fabric Series delivers zero-touch operations, network automation and deep visibility for data center fabrics and cloud-native applications. Supports physical and virtual workloads and choice of orchestration tools. It provides Layer 2 (L2) switching, L3 routing, and L4-7 service insertion and chaining. The scalable fabric is fully resilient with no single point of failure and supports headless mode operations.
Big Switch Networks Big Cloud Fabric Series
The Big Switch Networks Big Cloud Fabric Series is an application that uses hyperscale concepts of scalability, openness and agility to deliver intent-based networking based on SDN controls. By using HPE Altoline open networking switches and 3rd party software, customers may realize up to 50% TCO over legacy networks.
Big Switch Networks Big Cloud Fabric Series delivers zero-touch operations, network automation and deep visibility for data center fabrics and cloud-native applications. Supports physical and virtual workloads and choice of orchestration tools. It provides Layer 2 (L2) switching, L3 routing, and L4-7 service insertion and chaining. The scalable fabric is fully resilient with no single point of failure and supports headless mode operations.
Big Switch Networks Big Cloud Fabric Series
The Big Switch Networks Big Cloud Fabric Series is an application that uses hyperscale concepts of scalability, openness and agility to deliver intent-based networking based on SDN controls. By using HPE Altoline open networking switches and 3rd party software, customers may realize up to 50% TCO over legacy networks.
Big Switch Networks Big Cloud Fabric Series delivers zero-touch operations, network automation and deep visibility for data center fabrics and cloud-native applications. Supports physical and virtual workloads and choice of orchestration tools. It provides Layer 2 (L2) switching, L3 routing, and L4-7 service insertion and chaining. The scalable fabric is fully resilient with no single point of failure and supports headless mode operations.
Find what you are looking for?
Need help locating the right product for your business?
Our product experts would love to chat with you to find products and services that enable opportunities and resolve your business problems.