Need a 10GbE CNA enabled Ethernet NIC for your HPE BladeSystem? The HPE NC553m 10Gb 2-port FlexFabric Adapter delivers the performance benefits and cost savings of converged network connectivity for HPE BladeSystem servers. The dual-port NC553M optimizes network and storage traffic with hardware acceleration and offloads for stateless TCP/IP, TCP Offload Engine (TOE), and Fibre Channel.
The introduction of the HPE StoreFabric PCIe 8Gb Fibre Channel Host Bus Adapters brings datacenter infrastructure components to a higher level of performance and efficiency with the ability to deliver twice the I/O performance of 4 Gb FC HBAs. An 8 Gb Fibre Channel HBA purchased today is backward compatible with 4 and 2 Gb storage networks and will protect future investments. When using storage intensive applications, such as backup/restore, database transactions, virtualization, and rich media, the increased performance of the 8 Gb infrastructure enables more rapid storage and retrieval of critical information.
Finally, PCIe 8Gb FC Host Bus Adapters provide a number of features that work together to reduce power consumption, thus delivering a ""green"" benefit within the server.
Looking for a 2 port 10GbE mezzanine adapter card for Virtual Connect on your HPE BladeSystem? The NC532M is a multifunction 10 Gigabit Ethernet network adapter for the ProLiant c-Class BladeSystem. The adapter is a dual port 10GbE mezzanine that when paired with the new 10Gb Virtual Connect Module provides up to eight physical function NICs that can be configured to operate at any speed from 100 Mb/s to 10 Gb/s. The NC532m works as a standard dual port 10GbE NIC when connected to non-Virtual Connect devices such as the HPE 6120XG. The adapter ships with support for VLAN tagging, QoS, teaming (bonding), Receive Side Scaling (RSS), PXE. The NC532m adapter is supported in ProLiant c-class server Type I and II mezzanine slots allowing customers to provision their servers with unprecedented bandwidth never before available in a blade.
The QMH2562 is a PCI Express based 8Gb Fibre Channel mezzanine card for the HPE c-Class BladeSystem that delivers twice the data throughput as the previous generation 4Gb mezzanine card. It is optimized for virtualization, low power usage, management, security, reliability, availability and serviceability. While providing leading edge 8Gb performance, it is also backward compatible with 4Gb and 2Gb Fibre Channel speeds.
HPE StoreFabric Converged Network Adapters (CNAs) are dual port adapters that provide Ethernet, iSCSI, and Fibre Channel (FC) connectivity over 10 GbE/25 GbE using both Fibre Channel over Ethernet (FCoE) and Converged Enhanced Ethernet (CEE) standards. By consolidating Ethernet, iSCSI, and Fibre Channel onto a converged adapter, HPE CNAs reduce the number of separate adapters and cables required for your data center and also reduce operational, power, and cooling costs while preserving existing Ethernet and Fibre Channel infrastructure. HPE CNAs have also been thoroughly tested with HPE ProLiant servers and HPE Top of Rack (ToR) switches to help ensure a better HPE FCoE solution for your data center.
The HPE QMH2572 8Gb Fibre Channel Host Bus Adapter for BladeSystem c-Class is a PCI Express based Type A mezzanine card compatible with Gen8 server blades. It is optimized for virtualization, low power usage, management, security, reliability, availability and serviceability. While providing leading edge 8Gb performance, it is also backward compatible with 4Gb and 2Gb Fibre Channel speeds.
Do you need low power, high port density 1GbE network adapters for virtualization and server consolidation? The HPE Ethernet 1Gb 4-port 331FLR Adapter for select HPE ProLiant servers features the next generation of Ethernet integration, offering a single-chip solution in a FlexibleLOM form factor, which offers the option for future upgrades to 10GbE networking speeds. It delivers full line-rate performance across all ports with low power consumption. The HPE 331FLR is ideal for virtualization, security, server consolidation, network segmentation, and other applications requiring maximum throughput and port density. The total aggregate throughput of 4 Gb meets the needs of customers desiring high bandwidth. The HPE 331FLR supports advanced features such as Large Send and Receive offload capability, TCP checksum and segmentation, VLAN tagging, MSI-X, jumbo frames, IEEE 1588, HPE Sea of Sensors 3D and virtualization features such as VMware NetQueue and Microsoft VMQ.
Do you need a 1GbE adapter with low power, high port density and virtualization features? consolidation. The HPE Ethernet 1Gb 4-port 331T Adapter features the next generation of Ethernet integration, offering a single chip solution that reduces power requirements and optimizes I/O slot utilization. It delivers full line-rate performance across all ports with low power consumption. The Ethernet 1Gb 4-port 331T Adapter is ideal for virtualization, security, server consolidation, network segmentation, and other applications requiring maximum throughput and port density. The total aggregate throughput of 8 Gb meets the needs of customers desiring high bandwidth. The HPE Ethernet 1Gb 4-port 331T Adapter supports advanced features such as Large Send and Receive offload capability, TCP checksum and segmentation, VLAN tagging, MSI-X, jumbo frames, IEEE 1588, and virtualization features such as VMware NetQueue and Microsoft VMQ.
Do you need a 10GbE BladeSystem adapter for virtualization and scalability? The HPE 560FLB is a dual port 10 Gb Ethernet FlexibleLOM mezzanine adapter for select HPE ProLiant BladeSystem c-Class Gen8 servers. It provides customers with an upgrade path who are already using a 1 Gb FlexibleLOM to the 10 Gb 560FLB, protecting their server investment.
Features supported with the HPE 560FLB include enhanced Virtualization (VMQ, NetQueue, VMDq, SRIOV), I/O innovations with Intel Integrated I/O, Data Direct I/O, and IEEE 1588. The 560FLB ships with advanced server features including support for failover and load balancing, TCP/IP checksum offloading, large send offloading, Wake-on-LAN, PXE, jumbo frames, VLAN tagging, and EFI/uEFI.
The HPE LPe1205A is a PCI Express based 8Gb Fibre Channel Type A Mezzanine card compatible with HPE ProLiant BladeSystem c-Class servers. It provides superior reliability, exceptional performance, enhanced security, server side NPIV, and scalable management for virtual server and enterprise-class applications. The dual-channel design is ideal for mission critical applications that rely on highly available connectivity.
Using Emulex firmware and driver architecture, the HPE LPe1205A is designed to be fully driver compatible with all Emulex HBAs. This architecture allows firmware to be upgraded without taking the server off-line or re-booting, and without the need to upgrade the driver. As with all Emulex LightPulse Fibre Channel HBAs, the HPE LPe1205A is managed with Emulex OneCommand™ Manager (OCM). This provides a secure, centralized administration console to discover and manage Emulex Fibre Channel HBAs on local and remote hosts.