Would you like to use high-performance QSFP+ transceivers for both Ethernet and storage connections? The HPE Synergy 40GbE/4x10GbE/4x8Gb FC QSFP+ Transceiver delivers a full-duplex optical module with four independent transmit and receive channels supporting multiple data rate configurations including 40 GbE, 4x8 Gb and 4x10 GbE for high-density applications and improving performance.
Would you like an easy connection between HPE Synergy Image Steamer and HPE Synergy Interconnect Modules? The HPE Synergy Dual 10GBASE-T QSFP+ 30m RJ45 Transceiver is designed to convert the QSFP+ ports into dual 10GBASE-T ports on HPE Synergy 40Gb F8 Switch Module or HPE Virtual Connect 40Gb F8 Module for HPE Synergy. This conversion allows you to connect HPE Synergy Interconnect Modules with HPE Synergy Image Streamer using RJ45 cables, enabling integration of stateless provisioning with Synergy software-defined intelligence connected to Synergy server profiles. In addition to a connection with HPE Synergy Image Streamer, this transceiver provides dual 10 Gb connections through a QSFP+ port on the HPE Synergy Interconnect Modules for other high speed communication links that require 10GbE over Cat 6a/7 cables.
Can data center save costs by using low-cost RJ45 copper cables for 10GbE connection? The HPE 10GBase-T SFP+ Transceiver can convert a 10 Gb SFP+ port on an Hewlett Packard Enterprise switch to a 10GBase-T connection. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7 cable. This SFP+ transceiver offers 10 Gb/s communication over RJ45 copper cables.
What if you could deploy 100 Gb transceiver connections with an overall reduction of cost per bit? HPE 100Gb QSFP28 Transceivers are designed to meet the increasing demand of growing bandwidth in the data center. The 100 Gb performance allows a reduction of the port density and number of hardware components required to achieve this higher speed. With reduction of cost per bit, HPE 100Gb QSFP28 Transceivers can significantly reduce Capex and Opex spending on interconnect connections.
What if you could have 40 GbE connection using existing LC cables in your data center? The HPE 40Gb QSFP+ Bi-directional Transceiver integrates four electrical data lanes in each direction into transmission over a single LC duplex fiber optic cable. Together with other HPE 40GbE QSFP+ MPO Transceivers, it provides more flexibility and variety of high-density and low-power 40GbE solutions for Hewlett Packard Enterprise server users.
What if you could increase the speed in your data center interconnects by 2.5 times while reducing the amount of hardware required? The HPE 25Gb SFP28 Transceiver is designed to meet the increasing demand of higher bandwidth in the data center. The 2.5x bandwidth performance over 10GbE allows a reduction of the number of cables and connection ports required to achieve higher throughput. In addition, up to 100 m high-speed, efficient and cost-effective connectivity can be provided using this transceiver.
Does interconnect reliability and reach impacting your infrastructure? HPE StoreFabric Ethernet Transceivers, Active Optical Cables and Direct Attached Copper cables are designed to increase the performance of network connectivity, requiring high-bandwidth, low-latency connections between compute nodes, Storage nodes and switch nodes. To verify superior system performance, HPE StoreFabric Ethernet Transceivers, AOCs and DACs deliver compatibility with Hewlett Packard Enterprise storage solutions and networking adapters.
Do you need high-performance QSFP+ transceivers for your BladeSystem? The HPE BladeSystem c-Class QSFP+ Transceivers deliver a full-duplex optical module with four independent transmit and receive channels supporting data rates up to 4x10 Gb/s for high-density applications and improving performance.
The HPE BladeSystem c-Class SFP Transceivers provide high performance Ethernet connectivity and bring customers more choices for using either copper or optical cables.