Adapters

Stuck in network traffic at 10Gbps? Time to take the Express Lane with HPE 25GbE Adapters. With the rise in volume of mobile data and video and the frequency in which it’s accessed, legacy technologies are struggling to handle the increased throughput and lack the capabilities to cost-effectively scale. Current approaches to managing the increasing data center traffic require higher bandwidth and are cost prohibitive, keeping organizations from easily growing as their needs grow. The HPE Ethernet 10/25Gb 2-port FLR-SFP28 CX4 Adapter is a FlexibleLOM form factor for select HPE ProLiant Server DL family of rack and HPE Apollo Servers that delivers high-performance solutions to Telco, services providers, financial institutions and enterprises to meet higher bandwidth demand.

Stuck in network traffic at 10Gbps? Time to take the Express Lane with HPE 25GbE Adapters. Current approaches to managing the increasing data center traffic require higher bandwidth and is cost prohibitive, restricting organizations from easily growing as their needs grow. Legacy technologies are struggling to handle the increased throughput and lack the capabilities to cost-effectively scale. For the rise in volume of mobile data and video and the frequency at which it is accessed, The HPE Ethernet 10/25Gb 2-port SFP28 CX4121B Adapter for select HPE ProLiant Server DL family of rack and HPE Apollo Servers delivers high-performance solutions. It allows Telco, services providers, financial institutions and enterprises to meet the demanding needs of more bandwidth.

Do you require SDN features, low-latency and high-bandwidth in your data center?

The HPE Ethernet 10Gb 2-port SFP+ X710-DA2 Adapter offers the latest SDN features in a Standup form factor. The HPE Ethernet 10Gb 2-port SFP+ X710-DA2 Adapter is a feature rich, low power dual port PCIe v3.0 x8 lane adapter designed for use in HPE ProLiant Rack and Density Optimized servers.

Do you want to improve your performance and bandwidth without increasing your hardware complexity?

The HPE Synergy 6810C 25/50Gb Ethernet Adapter provides more than two times the bandwidth compared to 10/20Gb adapters. Therefore, it simplifies hardware implementation by reducing the number of adapters, associated switches and compute modules required to achieve higher bandwidth.

The networking acceleration on this adapter alleviates the CPU utilization, increases the number of virtual machines (VMs) placed on each server, and improves the cloud scale efficiency. Pairing with the Hewlett Packard Enterprise Synergy high-density 50G Ethernet switching solution, this adapter provides high throughput and low latency to implement intelligent and flexible networks.

HPE Converged Network Adapters (CNAs) are dual port adapters that provide Ethernet, iSCSI, and Fibre Channel (FC) connectivity over 10 GbE/25 GbE using both Fibre Channel over Ethernet (FCoE) and Converged Enhanced Ethernet (CEE) standards. By consolidating Ethernet, iSCSI, and Fibre Channel onto a converged adapter, HPE CNAs reduce the number of separate adapters and cables required for your data center and also reduce operational, power, and cooling costs while preserving existing Ethernet and Fibre Channel infrastructure. HPE CNAs have also been thoroughly tested with HPE ProLiant servers and HPE Top of Rack (ToR) switches to help ensure a better HPE FCoE solution for your data center.

Do you need a dual-port 10GbE low-cost, low-power adapter designed for your HPE ProLiant Gen8 and select G7 ML/DL/SL server? The HPE Ethernet 10Gb 2-port SFP+ X520-DA2 Adapter features both low-cost and low-power in a dual port PCIe v2.0 x8 form factor. The HPE Ethernet 10Gb 2-port SFP+ X520-DA2 Adapter addresses the demanding needs of the next-generation data center by providing unmatched features for virtualization and scalability that complement the HPE Gen8 server platform.

The HPE Ethernet 10Gb 2-port SFP+ X520-DA2 Adapter comes with both low profile and standard brackets and has two SFP+ cages that enable connections with DACs as well as SR fiber optic modules. It is SR-IOV ready and supports high performance networking features such as VLAN tagging, low latency interrupts, TCP and UDP checksum offloading, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), jumbo frames, and PXE boot.

Need a low cost, low power 1GbE adapter for your HPE ProLiant server?

The HPE Ethernet 1Gb 4-port BASE-T I350-T4V2 Adapter features a single chip solution, further reducing power requirements for 4 ports of 1 Gb Ethernet. The HPE Ethernet 1Gb 4-port BASE-T I350-T4V2 Adapter is PCI Express 2.1 x4 based on the latest Intel Ethernet Controller I350 designed for use with select HPE ProLiant rack, tower and density optimized servers.

Do you want to lower latency, increase bandwidth with combined Ethernet and storage capability in your data center? The HPE Ethernet 10/25Gb 2-port FLR-SFP28 QL41401L-A2G Converged Network Adapter supports 10GbE and 25GbE bandwidth along with the capability to support storage offloads and universal remote direct memory access (RDMA) protocols. This adapter has been designed with features that offload I/O processing to the adapter, reducing CPU overhead and efficiently deliver high performance and low latency network and storage connectivity. Freeing up CPU resources in the host allows for supporting more important tasks.

Are you looking for an easy and cost effective transition to 10GBASE-T with enhanced security features? The HPE Ethernet 10Gb 2-port BCM957416 Adapters utilize CAT 6A cabling with distances up to 100 meters and is backward compatible to existing 1GBASE-T infrastructure. This allows quick and easy incremental improvement of network speed without either changing the cables or major upgrade of equipment. These adapters help prevent, detect and recover from cyber attacks by protecting applications, data and server infrastructure by authenticating digitally signed firmware via a Root of Trust architecture. In addition, they offer Secure Boot, Device-level Firewall and other advanced security features.

What if you could increase I/O performance and simplify the connection between Synergy Compute Modules and complex storage environments?

Designed for the HPE Synergy composable fabric, HPE Synergy 3530C 16Gb Fibre Channel Host Bus Adapter connects Synergy compute resource pools to SANs over 16 Gb native Fibre Channel (FC) fabrics. It provides high-performance connectivity to HPE Synergy Virtual Connect FC Modules and Brocade® FC Switch Modules. The Synergy 3530C supports advanced virtualization, security, dual-port isolation, dynamic power management and low CPU utilization features. Doubling the I/O performance of 8 Gb FC HBAs, the Synergy 3530C is ideal for FC storage intense workloads.

Provisioning and updating Synergy 3530C are easy, reliable and fast using HPE Synergy software-defined, template-driven, frictionless operation. The HPE Synergy Composer automatically coordinates proper firmware and driver including staging updates to execute and avoid workload disruption.