HPE Apollo kl20 Server
Do you need a cost-effective, industry-standard server for highly parallel applications requiring performance across widely diverse workloads and legacy applications not optimized well for graphic processing unit (GPU) computing?
The HPE Apollo kl20 Server is a 2U server with up to four Intel® Xeon® Phi processors and with support for both Intel Omni-Path and Mellanox® InfiniBand interconnect fabric options for flexibility and increased price-performance and density. An ideal solution for running highly parallel applications optimized for the Xeon Phi Processors, especially for code which has already been optimized for the prior generation of the Intel Phi coprocessor and legacy applications for which recoding would be burdensome or where the environment requires performance across widely diverse workloads not optimized well for GPU computing.
Delivers a dense and flexible computing platform optimized for highly vectorized or memory bandwidth bound HPC applications.
HPE ProLiant XL170r Gen10 Server
Are you looking for a general-purpose 2P server node for your HPE Apollo 2000 Gen10 system to deploy for traditional enterprise workloads such as large cloud and web services?
The HPE ProLiant XL170r Gen10 server deployed in the HPE Apollo 2000 Gen10 system delivers a flexible scale-out architecture with higher density than traditional rack mount systems1 and firmware-level server security for your high-performance computing (HPC) workloads. Each server node can be serviced individually without affecting the operation of other nodes sharing the same chassis to provide increased server uptime.
Each server harnesses the performance of up to 2933 MT/s HPE DDR4 SmartMemory (16 DIMM slots per node) and dual 2nd generation Intel® Xeon® Scalable processors in a very efficient solution that shares both power and cooling infrastructure. Flexible storage options can support four small form factor (SFF), or three large form factor (LFF) disk drives or four NVMe solid state drives (SSDs).
HPE ProLiant XL190r Gen10 Server
Are you looking for a compute-intensive server node for your HPE Apollo 2000 Gen10 System that includes support for separate graphic processing unit (GPU) processors?
The HPE ProLiant XL190r Gen10 server deployed in the HPE Apollo 2000 Gen10 System delivers a dense solution with flexibility for up to two hot-pluggable server nodes in a standard 2U chassis. Each HPE ProLiant XL190r Gen10 server node can be serviced individually without impacting the operation of other nodes sharing the same chassis to provide increased server uptime.
The server node harnesses the performance of 2933 MT/s HPE DDR4 SmartMemory (16 DIMM slots per node) and dual Intel® Xeon® Scalable processors in a very efficient solution that shares both power and cooling infrastructure. It provides accelerated application performance with up to four GPU cards per HPE ProLiant XL190r Gen10 server. HPE Apollo 2000 Gen10 System delivers storage flexibility with options that support 12 SFF or 6 LFF HDD/SSD or 8 NVMe SSD.
HPE Apollo 6500 Gen9 System
Do you need to rapidly transform massive data streams?
The HPE Apollo 6500 System provides the tools and the confidence to deliver high performance computing (HPC) innovation. The system consists of three key elements: the HPE ProLiant XL270d Gen9 Server tray, the HPE Apollo d6500 Chassis, and the HPE Apollo 6000 Power Shelf.
The XL270d Gen9 Server provides up to 56 Tflops of single precision performance per server with eight NVIDIA® Tesla M40 GPU and two Intel® Xeon® E5-2600 v4 processors in a 2U server. With a configurable internal PCIe Gen3 fabric, choose to optimize the GPU topology to match your specific needs. High-bandwidth, low-latency networking is tightly coupled to the accelerators allowing you to take full advantage of your network. Two x16 PCIe Gen3 slots for your choice of high speed fabrics.
The Apollo 6500 System: Your next accelerated computing solution.
HPE Apollo 6500 Gen10 System
Do you need increased computing performance for high performance computing (HPC) and deep learning?
The HPE Apollo 6500 Gen10 System is an ideal HPC and deep learning platform providing unprecedented performance with industry-leading1 GPUs, fast GPU interconnect, high bandwidth fabric, and a configurable GPU topology to match your workloads. The ability of computers to autonomously learn, predict, and adapt using massive data sets is driving innovation and competitive advantage across many industries and applications are driving these requirements. The system with rock-solid reliability, availability, and serviceability (RAS) features includes up to eight GPUs per server, NVLink for fast GPU-to-GPU communication, Intel® Xeon® Scalable processors support, choice of high-speed / low latency fabric, and is workload enhanced using flexible configuration capabilities. While aimed at deep learning workloads, the system is suitable for complex simulation and modeling workloads.
HPE ProLiant XL750f Gen9 Server
Fuel ground breaking research in science and engineering with leading edge technology, while going greener than ever before. The HPE ProLiant XL750f Gen9 Server supports NVIDIA® Tesla® K40 XL GPUs. Applications that benefit from GPUs include seismic processing, biochemistry simulations, weather and climate modeling, image, video and signal processing, computational finance, computational physics, CAE, CFD, and data analytics.
The HPE Apollo 8000 System reaches new heights of performance density, with 4x the teraflops per square foot and up to 40% more FLOPs per watt than comparable air cooled servers.1 At the same time, the HPE Apollo 8000 System helps reduce your carbon footprint, saving up to 3,800 tons of CO2 per year.2 That’s about the same amount of CO2 produced per year by 790 cars!
HPE Apollo 8000 iCDU Rack
The HPE Apollo 8000 Intelligent Cooling Distribution Unit (iCDU) Rack provides 320 kW of efficient and resilient cooling using the lower half of a standard rack footprint. The iCDU connects to a standard 2.5-inch facility water pipe and cools up to four HPE Apollo f8000 racks.
The iCDU serves as a heat exchanger between the primary facilities and the secondary IT cooling. It isolates the secondary IT cooling loop for consistent water quality, containment, pressure and flow. The secondary loop remains at sub-atmospheric temperatures and the water flowing from redundant iCDUs to HPE Apollo f8000 racks is pumped under vacuum keeping water in place, for operational resiliency and serviceability.
Smart sensors automatically track thermal activity, dynamically adjusting system components to enhance system cooling for optimum efficiency.
The iCDU comes with a modular plumbing kit with quick disconnect 2.5 inch stainless connectors and flexible hoses for fast and easy deployment.
HPE Apollo f8000 Rack
With industry leading performance density, the HPE Apollo f8000 Rack holds up to 144 HPE ProLiant Servers with plenty of CPU, accelerator, memory and networking options in a standard rack footprint.
The HPE Apollo f8000 Rack powers HPC workloads with 3-phase high voltage AC, single stage power rectification and high voltage DC distribution. Smart sensors automatically track and dynamically adjust system components for optimum efficiency.
Water coming into the rack is distributed through manifolds that split out to thermal bus bars for heat transfer from the dry disconnect server trays. Water going out of the rack features isolation valves and is aggregated for energy recycling.
HPE Apollo 8000 System Manager provides real time data from hundreds of smart sensors and environmental controls; server data available with HPE Integrated Lights-Out, HPE Advanced Power Management; system monitoring, management and optimization.
HPE Apollo 6000 Power Shelf
Optimize rack scale power and increase efficiency with the HPE Apollo Power Shelf. This 1.5U shelf supplies 14.4 kW or 15.9 kW of power supporting 1-3 HPE Apollo a6000 Chassis depending on power load. Choose from single or 3-phase AC input for 12 x 12V DC cables from the HPE Apollo Power Shelf to the chassis.
Each HPE Apollo Power Shelf can hold up to 6 power supplies: 2650W Platinum hot-plug (15.9 kW non-redundant) or 2400W Platinum hot-plug (14.4 kW non-redundant). Choose from N, N+1, and N+N redundancy configurations to meet your workload needs.
HPE Advanced Power Management simplifies rack, chassis, server and component-level power monitoring and management, so you can get both the best performance and the highest level of efficiency.
HPE Apollo k6000 Chassis
Need an easy to manage solution that can scale at your high performance computing (HPC) demands? The HPE Apollo k6000 Chassis is designed with density optimization and HPC solution integration in mind to address these demands. The new modular, fully integrated, and highly flexible chassis is designed to hold the Hewlett Packard Enterprise Gen10 compute servers to fit your specific HPC workloads. It accommodates up to 24 HPE ProLiant XL230k Gen 10 Server trays, redundant power and cooling, Ethernet and high speed fabric switches to address various HPC workload needs. It is a performance optimized, air-cooled solution that fits in customer’s space limitations. This solution offers outstanding configuration flexibility, simplified administration and rack-scale efficiency that lowers the total cost of ownership (TCO) needed for mass scale HPC deployments.
* Prices may vary based on local reseller.