HPE XP P9000 DKA Encryption Software enables the encryption capability for all the data that is stored on the internal drives of the HPE XP P9500 Storage. The Enhanced DKA encrypts the data on disk drives so that data cannot be read off a disk drive that is removed from the HPE XP P9500 Storage. Only data on the disk drives is encrypted (data in cache is not encrypted).
HPE XP P9000 for Compatible Parallel Access Volumes and HPE XP P9000 for Compatible Hyper PAV Software enable high performance concurrent access of mainframe volumes by permitting a mainframe host system to issue multiple I/O requests in parallel to individual logical devices within the HPE XP P9500 Storage. Without PAV, mainframe systems can initiate only one I/O request per device at a time, and must wait for the I/O to complete before starting another I/O request to the same device. By utilizing alias addresses that all point to the same device as the base address, PAV enables the host system to start several I/O requests simultaneously to the same device, thus greatly improving performance.
The XP P9500 Storage supports static PAV, dynamic PAV, and Hyper PAV. With static PAV, the number of aliases assigned to each base device does not change. With dynamic PAV, high workload base devices can borrow idle PAV aliases from other base devices, increasing their I/O capability.
HPE XP P9000 Thin Provisioning Software reduces the cost, accelerates the return on investment and reduces the environmental impact of your HPE XP P9500 Storage. It allows you to supply disk storage capacity to your applications from a pool of virtualized storage. By enabling you to allocate your anticipated future storage capacity needs from virtual disk storage, HPE XP P9000 Thin Provisioning Software reduces the amount of physical disk capacity initially required. As utilization of disk space increases over time, you can purchase more disk capacity as it is needed and install it without affecting your applications. HPE XP P9000 Thin Provisioning Software reduces your initial storage acquisition cost, and reduces total cost of ownership, by allowing you to defer some storage purchases to a later date. Configure large logical volumes using a minimum of physical capacity, only paying for and installing storage when it is needed.
High Performance FICON for system z or zHPF is an enhancement of the FICON channel architecture; which also means compatibility with certain standards such as Fibre Channel Physical and Signaling standard (FC-FS), Fibre Channel Switch Fabric and Switch Control Requirements (FC-SW), and Fibre Channel Single-Byte-4 (FC-SB-4) standards. Enhancements have been made to the z/Architecture® and the FICON interface architecture to deliver improvements for online transaction processing (OLTP) workloads. zHPF is implemented exclusively in System z10. When High Performance FICON is exploited by the FICON channel, the z/OS operating system, and the control unit; the FICON channel overhead will be reduced. This is achieved by simplification of the protocol, and by reducing the number of information units processed, resulting in more efficient use of the fiber link.
HPE XP P9000 for Compatible Extended Remote Copy (XRC) Software provides disaster protection and data migration capability for data stored on an HPE XP P9500 Storage by implementing IBM mainframe compatible asynchronous remote replication. XP P9000 XRC provides the same functionality as IBM Extended Remote Copy (now called IBM TotalStorage z/OS Global Mirror), and is compatible with System Data Mover (SDM) mainframe software. When data is written to the local HPE XP P9500 Storage, XRC temporarily stores a time stamped copy of it in a side file. SDM in one of the mainframe hosts asynchronously reads the side file data from the local XP P9500 Storage and then writes the data to the remote disk array.
XRC can be combined with other XP P9500 Storage replication products for additional availability. When combined with XP P9000 Continuous Access Synchronous for Mainframe, XRC supports three Data Center disaster recovery solutions.
Store and manage mainframe and open systems data on a single HPE XP Disk Array. HPE XP Data Exchange Software allows seamless data exchange between mainframe and open systems hosts. It provides management of data format and code conversions, and allows information sharing across computing platforms. It supports HP-UX, Windows, Linux, Sun Solaris, IBM AIX, and mainframe operating systems.
Hitachi FlashCopy Mirroring for Mainframe enhances data availability for mainframe data and improves productivity by providing IBM FlashCopy compatible point-in-time copies within an XP disk array. As soon as a copy is created, it becomes available for use. The copy can be either virtual or physical. If a virtual copy is specified, it remains a pointer-based copy that only saves the changes from the original. However, if a physical copy is specified, a full copy will be completed in the background while both the source and the copy remain available for access.
For additional availability, FlashCopy can be combined with Hitachi ShadowImage for Mainframe, Hitachi TrueCopy for Mainframe, Hitachi Universal Replicator for Mainframe, and Hitachi Extended Remote Copy for Mainframe.
Hitachi Extended Remote Copy for Mainframe (XRC) provides disaster protection and data migration capability for data stored on the XP disk array system by implementing IBM mainframe compatible asynchronous remote replication. XRC provides the same functionality as IBM Extended Remote Copy (now called IBM TotalStorage z/OS Global Mirror), and is compatible with System Data Mover (SDM) mainframe software. When data is written to the local XP disk array, XRC temporarily stores a timestamped copy of it in a sidefile. SDM in one of the mainframe hosts asynchronously reads the sidefile data from the local XP disk array and then writes the data to the remote disk array
XRC can be combined with other XP disk array replication products for additional availability. When combined with Hitachi TrueCopy for Mainframe, XRC supports 3 Data Center disaster recovery solutions. In addition, XRC can be used with Hitachi ShadowImage for Mainframe or Hitachi FlashCopy Mirroring for Mainframe to maintain multiple copies of important data at the local and remote sites.
HPE 3PAR System Tuner Software spreads volumes evenly and widely across all available resources so that HPE 3PAR Storage can deliver balanced performance. However, as the storage system scales and new applications come online, new access patterns may emerge that result in sub-optimal performance levels.
HPE 3PAR System Tuner Software autonomically and non-disruptively detects potential bottlenecks and hotspots then rebalances volumes to maintain peak performance without impacting service levels or changing pre-existing service level characteristics such as RAID level.
* Prices may vary based on local reseller.
Find what you are looking for?