HPE XP8 Storage
Do you require 100% uptime on your data center storage infrastructure without compromising performance, scale, or flexibility?
The HPE XP8 Gen2 Storage array is the newest addition to the HPE XP storage family that has achieved 7-years of 100% data availability1 across the entire installed base. There is no room to improve on 100%, but HPE XP8 is raising the bar by delivering industry leading 8-nines5 of availability, nearly assuring continued 100% availability well into the future.
Without compromise means that HPE XP8 Gen2 provides unrivaled performance, scale and flexibility. In terms of performance, HPE XP8 delivers over 33 million IOPs2, well beyond competitors. HPE XP8 enables scalability up to 69 petabytes of internal capacity, and up to 255 PB of external virtual capacity. Flexibility to configure Hybrid or Flash, SAS or NVMe, HDD, SSD, FMD, or SCM. Newly added HW Compression Accelerator and Front-End FC NVMe adds even more performance, scale, and flexibility.
HPE MSA 2062 Storage
Looking for seriously simple and affordable flash storage?
The HPE MSA 2062 Storage is a flash-enabled system designed for affordable application acceleration for small and remote office deployments. Don’t let the low cost fool you. The HPE MSA 2062 gives you the combination of simplicity, flexibility and advanced features you may not expect in an entry-priced storage array. Starting with 3.84 TB of embedded flash capacity, you can scale the system from there with any combination of solid state disks (SSD), high-performance Enterprise SAS HDDs, or lower-cost Midline SAS HDDs. Capable of delivering up to 395,000 IOPS, the HPE MSA 2062 saves you up to 25% with an all-inclusive software suite and 3.84 TB of flash capacity included. It’s seriously simple and affordable flash storage to help you achieve high performance yet meet challenging budgets.
HPE MSA 1060 Storage
Need a modern shared storage array which is flash-ready and affordable with what’s left of a small budget?
The HPE MSA 1060 Storage brings affordable flash storage down to the most price sensitive customers. Designed to meet entry-level storage requirements, the HPE MSA 1060 Storage is a good fit for budget constrained customers. With one of the lowest entry price points in the Hewlett Packard Enterprise Storage portfolio and field-proven HPE ProLiant compatibility, the HPE MSA 1060 Storage is the platform of choice for smaller IT workloads. The HPE MSA 1060 Storage features 10G-BaseT iSCSI, FC and SAS host interface connectivity at previously unattainable entry price points. The MSA 1060 allows users to take advantage of the latest storage technologies while also providing a balance between performance and budget.
HPE MSA 2060 Storage
Is your company looking for easy to use, affordable, high-performance shared storage?
The HPE MSA 2060 Storage is a flash-ready hybrid storage system designed to deliver hands-free, affordable application acceleration for small and remote office deployments. Don’t let the low cost fool you. It gives you the combination of simplicity, flexibility, and advanced features you may not expect in an entry-priced array. Start small and scale as needed with any combination of solid state drives (SSDs), high-performance Enterprise SAS HDDs, or lower-cost Midline SAS HDDs. With the ability to deliver up to 395,000 IOPS, the new HPE MSA 2060 is up to 80% faster than its prior generation with ample horsepower for even the most demanding workloads.
HPE StoreEver LTO Ultrium Tape Drives
HPE StoreEver LTO Ultrium Tape Drives represent nine generations of linear tape open (LTO) technology capable of storing up to 45TB1 per cartridge, with hardware data encryption, HPE StoreOpen with linear tape file system (LTFS) for ease of use at an unprecedented performance. Data hardware encryption using AES 256-bit provides easy-to-enable security to protect the most sensitive data and prevent unauthorized access of tape cartridges. LTFS is an open format for storing data on tape that makes LTO generation 5 and later tapes self-describing and file-based. Capable of data transfer rates up to 300 MB/s native, the data rate matching further helps optimize performance by matching host system speed to keep drives streaming, thus enabling a faster tape performance.
HPE StoreEver Rack-mount Kits
The HPE StoreEver Rack-mount Kit provides a high-density, rack-mountable tape drive and Removable Disk Backup System solution for both direct-attach USB or SAS backup and archiving applications, or a combination of both LTO drives and RDX docks in the same 1U rack-mount kit. Available in a generic format supporting both SAS and USB interfaces, the 1U HPE StoreEver Rack-mount Kit accommodates up to two half-height internal tape drives with a maximum capacity of 60 TB (compressed) using two HPE LTO-8 Ultrium 30750 drives. The 1U enclosure also supports up to two internal HPE RDX docks with a maximum capacity of 8 TB per backup session when using two HPE RDX 4 TB USB removable hard disk drives.
HPE 3PAR StoreServ 20000 Storage
Have Cloud or IT-as-a-Service (ITaaS) environments forced you to settle for Tier-1 storage that compromises your data center? HPE 3PAR StoreServ 20000 Storage is an enterprise flash array with more than 3.8M IOPS, sub-millisecond latencies, a 16x density advantage over the competition1, and scalability of over 20 PB of usable capacity for massive consolidation – for block and file workloads as well as object access – with Quality of Service (QoS). The flash-optimized architecture features the HPE 3PAR Gen5 ASIC for silicon-based hardware acceleration, including inline deduplication, compression, data packing, thin technologies and other compaction technologies that can reduce acquisition and operational costs without compromising performance. Configuration options are available for all-flash models and combined flash and HDD models. HPE 3PAR StoreServ 20000 also includes at no extra charge data protection with HPE Recovery Manager Central.
HPE 3PAR StoreServ 8000 Storage
Looking to consolidate onto an enterprise-class flash array without compromising performance, scalability, data services, or resiliency?
HPE 3PAR StoreServ 8000 Storage, with the lowest all-flash starting price, delivers the performance advantages of a purpose-built, flash-optimized architecture without compromising resiliency, data services, or data mobility. Unlike other purpose-built flash arrays, 3PAR StoreServ 8000 doesn’t require you to introduce an entirely new architecture to achieve flash-optimized performance. With unmatched versatility, performance, and density, HPE 3PAR StoreServ 8000 Storage has you covered with unified storage of block & file protocols, application managed data protection and simplified fabric zoning along with SAN diagnostics.
HPE Apollo 4200 Gen10 Server
Are you looking for a 2U ultra-dense and rack-scale system providing the right balance of capacity, performance, and security for your data storage intensive workloads?
The HPE Apollo 4200 Gen10 server offers an architecture optimized for Big Data Analytics, Software-Defined Storage, backup and archive, and other data storage intensive workloads. Its unique, easily serviceable 2U design saves data center space with up to 28 LFF or 54 SFF hot-plug drives. It delivers accelerated performance with a superior bandwidth and balanced architecture, Intel® Xeon® Processors, and NVMe connected SSDs. The focus on security extends from FIPS 140-2 Level 1 validated storage controllers down to the system silicon level, taking full advantage of HPE innovations in firmware protection, malware detection, and recovery. With HPE GreenLake Flex Capacity and HPE Financial Services, you can combine the economic agility benefits of consumption-based IT with the performance and security of on-premise.
* Prices may vary based on local reseller.