Do you have challenges delivering cloud computing and scaling efficiently all-in-one compact server? HPE Cloudline CL2100 Gen10 server is cost-focused, Cloud-computing built for scalability. Powered by Intel® Xeon® Scalable processors, it is ideal for Cloud-computing workloads. This 1U chassis supports up to 10 Small Form Factor (SFF) hard disk drives to deliver up to 3.84 TB of storage per chassis. Ideal for Cloud-computing workload requirements, HPE Cloudline CL2100 Gen10 server supports up to 24 DDR4 DIMM slots to lower data center total cost of ownership through higher performance and greater density. A wide selection of high speed networking options with greater flexibility is also available.
Are you looking to scale-out your data centers with high density storage?
The HPE Cloudline CL3100 Gen10 server is an ideal 1U 2P dense storage server based on open infrastructure for cloud service providers that features up to two Second Generation Intel® Xeon® Scalable processor families. The HPE CL3100 Gen10 can be configured in either 12 LFF SATA HDDs or 20 SFF NVMe SSDs configurations. The 12 LFF HDD configuration is perfect for storage-rich, Hadoop and Casandra workloads, while the 20 NVMe SSD configuration offers great support for fast Big Data and real-time analytic workloads. Boot drives can be supported in the rear cage (2 SFF SATA SSDs) or in the on-board 80 mm M.2. Both HPE CL3100 Gen10 servers provide 16 DDR4 RDIMMs for high bandwidth memory needs up to 2933 MT/s. The HPE Cloudline CL3100 Gen10 also offers an OCP Mezzanine slot for network interfacing as well as a PCIe expansion slot for dual NICs (with OCP NIC) or controller support.
Do you have challenges delivering Big Data, cloud storage, and near-instantaneous compute all in one server? HPE Cloudline CL2200 Gen10 server is a versatile open infrastructure that delivers storage and Big Data. Powered by two Intel® Xeon® Scalable Processors, it is ideal for storage and Big Data workloads in combination with high IOPS computing demands. This chassis supports up to 24 Small Form Factor (SFF) or 12 Large Form Factor (LFF) front accessible hard disk drives with optional 2 SFF rear disk drives delivering outstanding storage capacity in a 2U chassis. For accelerated high IOPS, performance, and critical workloads requirements, HPE Cloudline CL2200 Gen10 Server supports up to four front-accessible NVMe SSDs delivering improved performance. A wide selection of high-speed networking options with great flexibility including open compute project (OCP) mezzanine or PCIe interfaces are available.
Is your organization looking to store object based or un-structured data at scale?
With the HPE Cloudline CL5200 Gen9 server, Hewlett Packard Enterprise offers a modular building block for cloud storage infrastructure by creating a multi-purpose system that specifically addresses storage and analytics workloads. For object storage, a single node HPE Cloudline CL5200 Gen9 server includes one server and up to 80 Large Form Factor (LFF) Hard Drives in a 4U chassis for a maximum of 800 TB per chassis. For Hadoop and other Big Data solutions, the HPE Cloudline CL5200 Gen9 server is available with two servers per chassis, each connected up to 40 LFF drives for applications that need a higher level of performance. Built with open standard principals such as IPMI management and Open Compute compliant networking, the HPE Cloudline CL5200 Gen9 server is purpose built for the next generation of cloud storage and Big Data applications.
Do you have problems delivering enough density and storage in your data center? The HPE Cloudline CL3100 Gen9 Server is a 1U open standards based, ultra dense storage server that is purpose built for Hadoop/Cassandra/Compute workloads. It supports up to 12 Large Form Factor (LFF) disk drives or 4 solid state drives (SSD) for booting. Networking flexibility is added with support for an OCP Mezzanine, 10/25/40 GbE options and redundant power supplies to provide increased uptime. The Cloudline CL3100 Gen9 Server capably supports storage intense Hadoop and compute applications taking advantage of 16 DDR4 DIMM slots and 10-port Intel® Chipset SAS/SATA options.
Is open compute density a priority in your data center?
The HPE Cloudline CL4100 Gen10 server delivers the features you expect in an enterprise solution, built on open design principles to deliver density and flexibility. It provides two independent hot-pluggable server nodes in a 40 inch 1U chassis. Each node can be serviced individually without impacting the operation of the other node sharing the same chassis for increased server uptime. The HPE Cloudline CL4100 Gen10 server harnesses the performance of dual Intel® Xeon® Scalable processors, and up to eight SFF storage drives, in an efficient package that shares both power and cooling. The HPE Cloudline CL4100 Gen10 server doubles the density, compared to standard rack servers. It increases available data center floor space and provides flexible configurations for open systems environments.
Is low-cost, multipurpose computing key to your data center deployment plans?
The HPE Cloudline CL2100 G3 Server is a multipurpose server which scales while keeping acquisition costs low with basic hardware and no frills mechanical designs. Offering a choice of four Large Form Factor (LFF) or eight Small Form Factor (SFF) drive bays, it can be applied to multiple workloads. The platform offers a choice of 4x1GbE or 2x1GbE embedded on the NIC for out-of-the-box flexibility. This is paired with I/O expansion capacity of up to three PCIe slots for greater networking flexibility. Supporting dual Intel® ES-2600 v3/v4 processors and sixteen (16) DDR DIMM slots, the HPE Cloudline CL2100 G3 Server is well matched to applications like NoSQL, cloud caching and search that place heavy demands on memory and storage. Includes rack-level integration and testing combined with standard interfaces including IPMI, DCMI/PXE boot, this versatile server is made to scale.
Can low cost Big Data and cloud storage make a difference in your service model?
The HPE Cloudline CL2200 G3 Server delivers Big Data and cloud storage functionality for web-scale service providers in a package that uses basic hardware and no frills mechanical designs to lower acquisition costs. As memory-intensive environments demand capacity, the server arrives with twelve Large Form Factor (LFF) drives for application and storage while two additional Small Form Factor (SFF) drives handle booting and provide improved serviceability. Networking flexibility is added with support for up to five PCIe slots while dual, hot-plug power supplies delivering increased uptime. The HPE Cloudline CL2200 G3 Server capably supports storage intense Hadoop®, database, NoSQL and cloud storage applications taking advantage of 16 DDR4 DIMM slots and 10-port Intel® Chipset SAS/SATA options. With rack-level integration the HPE Cloudline 2200 G3 Server scales as your business does.
Do you need an open system that offers ultra-high density for your storage-rich applications, that doesn't sacrifice quality, deploys easily, and can be serviced and supported globally?
The HPE Cloudline CL5800 Gen10 server has been fine-tuned for storage intensive, cloud-based object storage or file storage workloads. With a standard AMI BIOS for open systems compatibility, it balances storage and manageability in a 4U form factor. These characteristics provide the right amount of compute and storage in an open systems environment. It is ideal for hyper-scalers, cloud service providers, and enterprise customers with growing storage requirements. The HPE Cloudline CL5800 Gen10 server supports 2nd generation Intel® Xeon® Scalable processors, six memory channels per CPU, open systems management, and industry standard options, all in a 4U standard chassis with redundant power supplies. In addition, the server supports up to 100 LFF HDDs and up to four SFF SATA SSDs.