Are you looking for a 2U ultra-dense and rack-scale system providing the right balance of capacity, performance, and security for your data storage intensive workloads?
The HPE Apollo 4200 Gen10 server offers an architecture optimized for Big Data Analytics, Software-Defined Storage, backup and archive, and other data storage intensive workloads. Its unique, easily serviceable 2U design saves data center space with up to 28 LFF or 54 SFF hot-plug drives. It delivers accelerated performance with a superior bandwidth and balanced architecture, Intel® Xeon® Processors, and NVMe connected SSDs. The focus on security extends from FIPS 140-2 Level 1 validated storage controllers down to the system silicon level, taking full advantage of HPE innovations in firmware protection, malware detection, and recovery. With HPE GreenLake Flex Capacity and HPE Financial Services, you can combine the economic agility benefits of consumption-based IT with the performance and security of on-premise.
Do you need a flexible and dense storage system for your scale-out object storage, archive, or data analytics solution?
The HPE Apollo 4510 Gen10 System offers revolutionary storage density in a 4U form factor that fits in Hewlett Packard Enterprise standard 1075 mm racks. It gives you the performance you need to run Big Data solutions such as object storage, data analytics, deep archive, or other data-intensive workloads, while also saving you valuable data center rack space. The HPE Apollo 4510 Gen10 System features support for dual Intel® Xeon® Processor Scalable Family processors, the full stack of HPE ProLiant management tools, and flexibility to configure with a variety of power, controller, and network interface options. It holds up to sixty large form factor (LFF) SAS or SATA drives, so there’s plenty of room for growth. And it also supports two hot-plug small form factor (SFF) SAS, SATA, or NVMe drives plus two internal M.2 NVMe drives for boot, caching, or hosting logs.
Do you need increased computing performance for high performance computing (HPC) and deep learning?
The HPE Apollo 6500 Gen10 System is an ideal HPC and deep learning platform providing unprecedented performance with industry-leading1 GPUs, fast GPU interconnect, high bandwidth fabric, and a configurable GPU topology to match your workloads. The ability of computers to autonomously learn, predict, and adapt using massive data sets is driving innovation and competitive advantage across many industries and applications are driving these requirements. The system with rock-solid reliability, availability, and serviceability (RAS) features includes up to eight GPUs per server, NVLink for fast GPU-to-GPU communication, Intel® Xeon® Scalable processors support, choice of high-speed / low latency fabric, and is workload enhanced using flexible configuration capabilities. While aimed at deep learning workloads, the system is suitable for complex simulation and modeling workloads.
With industry leading performance density, the HPE Apollo f8000 Rack holds up to 144 HPE ProLiant Servers with plenty of CPU, accelerator, memory and networking options in a standard rack footprint.
The HPE Apollo f8000 Rack powers HPC workloads with 3-phase high voltage AC, single stage power rectification and high voltage DC distribution. Smart sensors automatically track and dynamically adjust system components for optimum efficiency.
Water coming into the rack is distributed through manifolds that split out to thermal bus bars for heat transfer from the dry disconnect server trays. Water going out of the rack features isolation valves and is aggregated for energy recycling.
HPE Apollo 8000 System Manager provides real time data from hundreds of smart sensors and environmental controls, server data available with HPE Integrated Lights-Out, HPE Advanced Power Management, system monitoring, management and optimization.
The HPE Apollo a6000 Chassis provides power, cooling, and I/O infrastructure to support HPE ProLiant XL Servers and options today and for years to come. This 5U chassis holds up to 10 server trays vertically and fits in a standard rack. The Innovation Zone in the back of the chassis holds up to 10 I/O modules, with dual HPE FlexibleLOMs supporting 1GbE or 10GbE. Power is delivered through an external 1.5U power shelf (14.4 kW or 15.9 kW) supporting up to 6 chassis depending on power load. Choose from single or 3-phase AC input, with 12 x 12V DC cables from the power shelf to the chassis. An HPE Advanced Power Management module helps optimize rack, chassis, and server power insight and management.
Do you need a server platform for enterprise workloads that can scale per your needs?
The HPE ProLiant XL230a Gen9 Server delivers 2P performance for your budget, while leveraging the HPE Apollo 6000 System and its modular flexibility and rack-scale efficiency. Featuring the Intel® Xeon® E5-2600 v3/v4 series processors, the 16 DIMM slots are ready with DDR4 2133(1024 GB maximum)/2400 (2048 GB maximum) MHz memory and HPE SmartMemory.
The modular HPE Apollo 6000 Chassis accommodates up to ten (10) hot-swap server trays, with the flexibility to choose from the HPE ProLiant XL230a Gen9 Server, the HPE ProLiant XL250a Gen9 Server, or a combination of server trays to meet your workload needs while lowering your TCO.
The Apollo 6000 Power Shelf drives rack scale power efficiency, while the Hewlett Packard Enterprise Advanced Power Manager provides real-time power measurements and enables rack-level dynamic power capping.
Fuel ground breaking research in science and engineering with leading edge technology, while going greener than ever before. The HPE ProLiant XL740f Gen9 Server supports Intel® Xeon Phi™ 7120D coprocessors. Applications that benefit from coprocessors include seismic processing, biochemistry simulations, weather and climate modeling, image, video and signal processing, computational finance, computational physics, CAE, CFD, and data analytics.
The HPE Apollo 8000 System reaches new heights of performance density, with 4x the teraflops per square foot and up to 40% more FLOPs per watt than comparable air cooled servers.1 At the same time, the HPE Apollo 8000 System helps reduce your carbon footprint, saving up to 3,800 tons of CO2 per year.2 That’s about the same amount of CO2 produced per year by 790 cars!
In your scale-out deployment, do your servers allow you to leverage the full potential of your Big Data?
The HPE ProLiant XL450 Gen9 Server gives you the power to optimize your performance requirements for Hadoop or object storage workloads using up to 2 Intel Xeon E5-2600v3 processors, and up to 512 GB (in 16 DIMMs) of memory per server. For ideal performance in analytics workloads, the HPE ProLiant XL450 Gen9 Server offers up to 16 cores per processor and up to 135W. Each server also features up to 4 PCIe Gen3 slots and a FlexibleLOM, enabling you to adapt to the I/O requirements of your workloads now and into the future.
In addition, the HPE ProLiant XL450 Gen9 Server offers HPE ProLiant management software like HPE Integrated Lights-Out 4 (iLO4) to deploy, manage, and utilize valuable data center resources. Whether you are running object storage, Hadoop, or other data intensive applications, you can deploy your scale-out XL450 architecture with confidence.
Are you looking for a compute-intensive server node for your HPE Apollo 2000 Gen10 System that includes support for separate graphic processing unit (GPU) processors?
The HPE ProLiant XL190r Gen10 server deployed in the HPE Apollo 2000 Gen10 System delivers a dense solution with flexibility for up to two hot-pluggable server nodes in a standard 2U chassis. Each HPE ProLiant XL190r Gen10 server node can be serviced individually without impacting the operation of other nodes sharing the same chassis to provide increased server uptime.
The server node harnesses the performance of 2933 MT/s HPE DDR4 SmartMemory (16 DIMM slots per node) and dual Intel® Xeon® Scalable processors in a very efficient solution that shares both power and cooling infrastructure. It provides accelerated application performance with up to four GPU cards per HPE ProLiant XL190r Gen10 server. HPE Apollo 2000 Gen10 System delivers storage flexibility with options that support 12 SFF or 6 LFF HDD/SSD or 8 NVMe SSD.
Max 4 items can be added for comparison.
Find what you are looking for?