HPE Installation and Startup Hardware for 3PAR 9000 Service
Designed to provide a smooth startup, HPE 3PAR StoreServ 8000, 9000, and 20000 Storage Installation and Startup Service provides deployment of your HPE 3PAR StoreServ 8000, 9000, and 20000 Storage, helping to ensure proper installation in your storage environment as well as helping you increase the benefit from your storage investment.
The service provides activities required to help you deploy your HPE 3PAR StoreServ 8000, 9000, and 20000 Storage into operation. With the assistance of your designated IT storage administrator, a Hewlett Packard Enterprise service specialist deploys your array as more fully described in the Service features table.
When ordered with hardware upgrade products, the service also provides deployment of hardware upgrades to your existing HPE 3PAR StoreServ 8000, 9000, and 20000 Storage.
The service includes the following:
For new arrays, configuration and presentation of a test virtual volume using nonproduction data for up to two hosts
For array upgrades, installation and configuration of the array upgrade products as further detailed in the following sections
Reconfiguration of your existing array—for example, virtual volumes, hosts, or a SAN—is outside the scope of this service.
For installation of the array into a rack, supply, assembly, configuration, and positioning of the rack are excluded from this service. Please refer to additional exclusions in the Service limitations section.
HPE Installation and Startup Software for 3PAR 9000 Service
Designed to provide a smooth startup, HPE 3PAR and HPE Primera Software Installation and Startup Service provides deployment of your HPE 3PAR 8000, 9000, and 20000 and HPE Primera storage software, helping to ensure proper installation in your storage environment as well as helping you increase the benefit from your storage investment.
Complementing your new HPE 3PAR and HPE Primera storage software, HPE 3PAR and HPE Primera Software Installation and Startup Service provides the necessary activities required to help you deploy your licensed HPE 3PAR and HPE Primera software products into operation. With the assistance of your designated IT storage administrator, an HPE service specialist deploys your HPE 3PAR and HPE Primera software as more fully described in the Service features table.
This service is applicable only for supported environments. Scripting is not within the scope of the service, but can be accommodated at additional cost (scripting can help enable integration and end-to-end automation within your organization’s environment). Please refer to additional exclusions in the Service limitations section.
HPE Installation and Startup for 3PAR 9000 All Inclusive Single System Service
Designed to provide a smooth startup, HPE 3PAR All-inclusive Single-system StoreServ Software Installation and Startup Service provides deployment of your HPE 3PAR storage software, helping to ensure proper installation in your storage environment as well as helping you increase the benefit from your storage investment.
Complementing your new HPE 3PAR All-inclusive Single-system software, HPE 3PAR All-inclusive Single-system Software Installation and Startup Service provides the necessary activities required to help you deploy Adaptive Optimization, Dynamic Optimization, File Persona, Priority Optimization, System Reporter, Virtual Copy, and provide an overview of Virtual Domains and Virtual Lock. With the assistance of your designated IT storage administrator, an HPE service specialist deploys your HPE 3PAR All-inclusive Single-system software as more fully described in the Service feature table.
Deployment of HPE Application Suite, Online Import, Recovery Manager Central, and Smart SAN for 3PAR products are excluded from this service. Separate services are available.
For HPE 3PAR Virtual Copy, this service provides a limited implementation to help you get Virtual Copy up and running quickly and to provide a demonstration of the product’s key features using sample or test data only. The following advanced deliverables are excluded from this service but are available via the HPE Data Replication Solution Service for HPE 3PAR Virtual Copy software:
• Implementation and testing of the HPE 3PAR Virtual Copy software configuration using production volumes or a production application
• Other services that address the unique requirements of your organization, such as verification of multiple applications you have configured; scripting; or integration and configuration of your applications by Hewlett Packard Enterprise, backup environment, or databases (Scripting can help enable integration and end-to-end automation within your organization’s environment.)
This service is applicable only for supported environments. Please refer to additional exclusions in the Service limitations section.
HPE Installation and Startup StoreOnce RMC Oracle for 3PAR Service
For a smooth startup, HPE StoreOnce Recovery Manager Central Software Installation and Startup Service provides deployment of your HPE StoreOnce Recovery Manager Central software, with features designed to both help ensure proper installation in your storage environment and increase the benefit from your storage investment.
Complementing your new HPE StoreOnce Recovery Manager Central storage software, HPE StoreOnce Recovery Manager Central Software
Installation and Startup Service provides a set of features associated with deployment of your licensed HPE StoreOnce Recovery Manager
Central software products into operation. With the assistance of your designated IT storage administrator, an HPE service specialist deploys
your HPE StoreOnce Recovery Manager Central software as more fully described in this document.
This is a one-day service and provides a limited implementation to help you get HPE Recovery Manager Central Software up and running quickly and to provide a demonstration of the product’s key features using sample or test data only.
This service is applicable only to supported environments. Scripting is not within the scope of the service, but can be accommodated at additional charge (scripting can help enable integration and end-to-end automation within your organization’s environment).
HPE Aruba Networking Foundational Care 1Y 24x7 CDMR HW SW Collab SVC
HPE Foundation Care Service is composed of comprehensive hardware and software services aimed to help increase the availability of your IT infrastructure. Hewlett Packard Enterprise (HPE) technical resources provide support and work with your IT team to help you resolve hardware and software problems with HPE and selected third-party products.
For hardware products covered by HPE Foundation Care, the service includes remote diagnosis and support, as well as on-site hardware repair if it is required to resolve an issue. For eligible HPE hardware products, this service may also include Basic Software Support and Collaborative Call Management for selected non-HPE software.
Contact HPE for more information and determination regarding which eligible software products may be included as part of your hardware product coverage. For software products covered by HPE Foundation Care, HPE provides remote technical support and access to software updates and patches.
Updates for selected HPE-supported third-party software products are included, as they are made available from the original software manufacturer.
In addition, HPE Foundation Care provides electronic access to related product and support information, enabling any member of your IT staff to locate this commercially available essential information. For third-party products, access is subject to availability of information from the original manufacturer.
You can choose from a set of reactive support levels to meet your business and operational needs.
HPE Foundation Care service-level options: The HPE Foundation Care options noted in the following are product dependent. HPE will provide the hardware support features for covered hardware products and the software support features for covered software products.
Hardware support coverage windows and response times will apply to covered hardware products, and software support coverage windows and response times will apply to covered software products.
All coverage windows are subject to local availability. Product eligibility may vary. Contact a local HPE sales office for detailed information on service availability and product eligibility.
Regardless of your coverage window, incidents with covered hardware or software can be reported to HPE via telephone or web portal, as locally available, or as an automated equipment reporting event via the HPE electronic remote support solution 24 hours a day, 7 days a week.
For products covered by Foundation Care, HPE offers three distinct service levels:
• HPE Foundation Care NBD Service
• HPE Foundation Care 24x7 Service
• HPE Foundation Care CTR Service
HPE Aruba Networking Foundational Care 1Y CTR CDMR HW SW Collab SVC
HPE Foundation Care Service is composed of comprehensive hardware and software services aimed to help increase the availability of your IT infrastructure. Hewlett Packard Enterprise (HPE) technical resources provide support and work with your IT team to help you resolve hardware and software problems with HPE and selected third-party products.
For hardware products covered by HPE Foundation Care, the service includes remote diagnosis and support, as well as on-site hardware repair if it is required to resolve an issue. For eligible HPE hardware products, this service may also include Basic Software Support and Collaborative Call Management for selected non-HPE software.
Contact HPE for more information and determination regarding which eligible software products may be included as part of your hardware product coverage. For software products covered by HPE Foundation Care, HPE provides remote technical support and access to software updates and patches.
Updates for selected HPE-supported third-party software products are included, as they are made available from the original software manufacturer.
In addition, HPE Foundation Care provides electronic access to related product and support information, enabling any member of your IT staff to locate this commercially available essential information. For third-party products, access is subject to availability of information from the original manufacturer.
You can choose from a set of reactive support levels to meet your business and operational needs.
HPE Foundation Care service-level options: The HPE Foundation Care options noted in the following are product dependent. HPE will provide the hardware support features for covered hardware products and the software support features for covered software products.
Hardware support coverage windows and response times will apply to covered hardware products, and software support coverage windows and response times will apply to covered software products.
All coverage windows are subject to local availability. Product eligibility may vary. Contact a local HPE sales office for detailed information on service availability and product eligibility.
Regardless of your coverage window, incidents with covered hardware or software can be reported to HPE via telephone or web portal, as locally available, or as an automated equipment reporting event via the HPE electronic remote support solution 24 hours a day, 7 days a week.
For products covered by Foundation Care, HPE offers three distinct service levels:
• HPE Foundation Care NBD Service
• HPE Foundation Care 24x7 Service
• HPE Foundation Care CTR Service
HPE Aruba Networking Foundational Care 1Y NBD CDMR HW SW Collab SVC
HPE Foundation Care Service is composed of comprehensive hardware and software services aimed to help increase the availability of your IT infrastructure. Hewlett Packard Enterprise (HPE) technical resources provide support and work with your IT team to help you resolve hardware and software problems with HPE and selected third-party products.
For hardware products covered by HPE Foundation Care, the service includes remote diagnosis and support, as well as on-site hardware repair if it is required to resolve an issue. For eligible HPE hardware products, this service may also include Basic Software Support and Collaborative Call Management for selected non-HPE software.
Contact HPE for more information and determination regarding which eligible software products may be included as part of your hardware product coverage. For software products covered by HPE Foundation Care, HPE provides remote technical support and access to software updates and patches.
Updates for selected HPE-supported third-party software products are included, as they are made available from the original software manufacturer.
In addition, HPE Foundation Care provides electronic access to related product and support information, enabling any member of your IT staff to locate this commercially available essential information. For third-party products, access is subject to availability of information from the original manufacturer.
You can choose from a set of reactive support levels to meet your business and operational needs.
HPE Foundation Care service-level options: The HPE Foundation Care options noted in the following are product dependent. HPE will provide the hardware support features for covered hardware products and the software support features for covered software products.
Hardware support coverage windows and response times will apply to covered hardware products, and software support coverage windows and response times will apply to covered software products.
All coverage windows are subject to local availability. Product eligibility may vary. Contact a local HPE sales office for detailed information on service availability and product eligibility.
Regardless of your coverage window, incidents with covered hardware or software can be reported to HPE via telephone or web portal, as locally available, or as an automated equipment reporting event via the HPE electronic remote support solution 24 hours a day, 7 days a week.
For products covered by Foundation Care, HPE offers three distinct service levels:
• HPE Foundation Care NBD Service
• HPE Foundation Care 24x7 Service
• HPE Foundation Care CTR Service
HPE One View Installation and Migration Add-on Service
HPE OneView Installation and BladeSystem c7000 Migration Service is a basic fixed-price, fixed-scope installation and startup service for customers transitioning from an existing HPE Virtual Connect Manager/Virtual Connect Enterprise Manager (VCM/VCEM) management environment.
The service includes the installation and configuration of a single HPE OneView virtual appliance on a supported hypervisor host (VMware vSphere® or Microsoft® Hyper-V) on a supported HPE ProLiant server (blade environment). It provides configuration and first-time setup of all managed devices within a single HPE BladeSystem c7000 enclosure. In a rackmount environment, it provides configuration and setup of all managed devices within a single rack.
The service includes bringing the enclosure (or HPE supported ProLiant servers) under management, defining the enclosure’s network configuration (networks, network sets, SAN connectivity, etc.), and creating and assigning server profiles for the server blades in the enclosure (or HPE ProLiant servers). Please refer to the current HPE OneView Support Matrix for details on supported products.
The service also includes the migration of a single HPE BladeSystem c7000 enclosure from an existing HPE VCM/VCEM domain to HPE OneView. Hewlett Packard Enterprise will provide a test and verification session to confirm the configuration setup, along with a brief customer orientation session.
An add-on service is available to migrate up to four additional HPE BladeSystem c7000 enclosures to the same HPE OneView environment during the same service engagement as the initial enclosure service described earlier, with the following requirements:
• The add-on product number must be of the same sales order as the initial service
• Up to four additional enclosures can be included per add-on service
• Up to four add-on services can be included per order
For migrations over larger environments (those with more than 17 enclosures), across multiple locations, and from environments other than HPE VCM/VCEM, please contact your HPE account representative.
HPE Installation and Startup 3PAR Processor Service
Designed to provide a smooth startup, HPE 3PAR StoreServ 8000, 9000, and 20000 Storage Installation and Startup Service provides deployment of your HPE 3PAR StoreServ 8000, 9000, and 20000 Storage, helping to ensure proper installation in your storage environment as well as helping you increase the benefit from your storage investment.
The service provides activities required to help you deploy your HPE 3PAR StoreServ 8000, 9000, and 20000 Storage into operation. With the assistance of your designated IT storage administrator, a Hewlett Packard Enterprise service specialist deploys your array as more fully described in the Service features table.
When ordered with hardware upgrade products, the service also provides deployment of hardware upgrades to your existing HPE 3PAR StoreServ 8000, 9000, and 20000 Storage.
The service includes the following:
For new arrays, configuration and presentation of a test virtual volume using nonproduction data for up to two hosts
For array upgrades, installation and configuration of the array upgrade products as further detailed in the following sections
Reconfiguration of your existing array—for example, virtual volumes, hosts, or a SAN—is outside the scope of this service.
For installation of the array into a rack, supply, assembly, configuration, and positioning of the rack are excluded from this service. Please refer to additional exclusions in the Service limitations section.
* Prices may vary based on local reseller.