Do you need a cost-effective, industry-standard server for highly parallel applications requiring performance across widely diverse workloads and legacy applications not optimized well for graphic processing unit (GPU) computing? The HPE Apollo kl20 Server is a 2U server with up to four Intel® Xeon® Phi processors and with support for both Intel Omni-Path and Mellanox® InfiniBand interconnect fabric options for flexibility and increased price-performance and density. An ideal solution for running highly parallel applications optimized for the Xeon Phi Processors, especially for code which has already been optimized for the prior generation of the Intel Phi coprocessor and legacy applications for which recoding would be burdensome or where the environment requires performance across widely diverse workloads not optimized well for GPU computing. Delivers a dense and flexible computing platform optimized for highly vectorized or memory bandwidth bound HPC applications.
Are you looking to accelerate deployment of SAS High-Performance Visual Analytics? HPE Converged Infrastructure for SAS High-Performance Visual Analytics is optimized for the in-memory analytics engine, scaling from 1, or 4 to 256+ HPE ProLiant BL and DL Servers, delivering analytical results to Web browsers and mobile devices in seconds to minutes. These pre-approved configurations support deployments of non-distributed to highly distributed environments. Flexible SMP and MPP configurations that are sized to your workload, and are integrated by the HPE factory closest to you, wherever you are worldwide, regardless of the organizational size. HPE performs onsite installation, working with you to verify network connectivity before a SAS® consultant completes the final software setup. HPE Financial Services offers financing for the total solution, both HPE CI and SAS solutions alike. This solution enables the co-existence of data nodes with Cloudera®. They are supported by SAS EEC.
Are you looking for a compute-intensive server node for your HPE Apollo 2000 Gen10 System that includes support for separate graphic processing unit (GPU) processors?
The HPE ProLiant XL190r Gen10 server deployed in the HPE Apollo 2000 Gen10 System delivers a dense solution with flexibility for up to two hot-pluggable server nodes in a standard 2U chassis. Each HPE ProLiant XL190r Gen10 server node can be serviced individually without impacting the operation of other nodes sharing the same chassis to provide increased server uptime. The server node harnesses the performance of 2933 MT/s HPE DDR4 SmartMemory (16 DIMM slots per node) and dual Intel® Xeon® Scalable processors in a very efficient solution that shares both power and cooling infrastructure. It provides accelerated application performance with up to four GPU cards per HPE ProLiant XL190r Gen10 server. HPE Apollo 2000 Gen10 System delivers storage flexibility with options that support 12 SFF or 6 LFF HDD/SSD or 8 NVMe SSD.
Are you looking to consolidate your enterprise data center applications and workloads from legacy storage as part of your digital transformation? HPE 3PAR StoreServ 9000 Storage helps you consolidate primary storage workloads – for file and block -- onto an enterprise-class flash array without compromising performance, scalability, data services, or resiliency. This HPE 3PAR 9000 Storage is based on the proven HPE 3PAR architecture and is purpose built for all-flash consolidation, delivering the performance, simplicity and agility needed to support your hybrid IT environment. Whether your applications are virtualized, containerized, or traditional, the HPE 3PAR StoreServ 9000 Storage offers you a solution that can deliver improved business results. More transactions, better availability, lower costs regardless of how you consume storage, with a cloud-like pay as you grow model or a traditional capital expense model. Hewlett Packard Enterprise, has you covered.
Are you looking for a 2U ultra-dense and rack-scale system providing the right balance of capacity, performance, and security for your data storage intensive workloads? The HPE Apollo 4200 Gen10 Server offers an architecture optimized for Big Data Analytics, Software-Defined Storage, backup and archive, and other data storage intensive workloads. Its unique, easily serviceable 2U design saves data center space with up to 28 LFF or 54 SFF hot-plug drives. It delivers accelerated performance with a superior bandwidth and balanced architecture, Intel® Xeon® Processors, and NVMe connected SSDs. The focus on security extends from FIPS 140-2 Level 1 validated storage controllers down to the system silicon level, taking full advantage of HPE innovations in firmware protection, malware detection, and recovery. With HPE GreenLake Flex Capacity and HPE Financial Services, you can combine the economic agility benefits of consumption-based IT with the performance and security of on-premise.
Do you require higher performance computation for deep learning, high-performance computing (HPC) workloads, or graphics?
Companies are facing greater computational and graphics requirements as large and complex computational models become more commonplace. Traditional CPU technology is no longer able to keep up with these increasing demands. NVIDIA® accelerators for HPE ProLiant servers seamlessly integrate GPU computing with select HPE server families. Designed for power-efficient, high-performance supercomputing, NVIDIA accelerators deliver dramatically higher application acceleration than a CPU-only approach for a range of deep learning, scientific, and commercial applications. The thousands of NVIDIA CUDA® cores of each accelerator allow it to divide large computing or graphics tasks into thousands of smaller tasks that can be run concurrently, thus enabling much faster simulations and improved graphics fidelity for extremely demanding 3D models.
Do you need to rapidly transform massive data streams?
The HPE Apollo 6500 System provides the tools and the confidence to deliver high performance computing (HPC) innovation. The system consists of three key elements: the HPE ProLiant XL270d Gen9 Server tray, the HPE Apollo d6500 Chassis, and the HPE Apollo 6000 Power Shelf.
The XL270d Gen9 Server provides up to 56 Tflops of single precision performance per server with eight NVIDIA® Tesla M40 GPU and two Intel® Xeon® E5-2600 v4 processors in a 2U server. With a configurable internal PCIe Gen3 fabric, choose to optimize the GPU topology to match your specific needs. High-bandwidth, low-latency networking is tightly coupled to the accelerators allowing you to take full advantage of your network. Two x16 PCIe Gen3 slots for your choice of high speed fabrics.
The Apollo 6500 System: Your next accelerated computing solution.
Does your data center need a secure, performance driven dense server that you can confidently deploy for virtualization, database, or high-performance computing?
The HPE ProLiant DL360 Gen10 server delivers security, agility and flexibility without compromise. It supports the Intel® Xeon® Scalable processor with up to a 60% performance gain  and 27% increase in cores , along with 2933 MT/s HPE DDR4 SmartMemory supporting up to 3.0 TB  with an increase in performance of up to 82% . With the added performance that HPE Persistent Memory , HPE NVDIMMs  and 10 NVMe bring, the HPE ProLiant DL360 Gen10 means business. Deploy, update, monitor and maintain with ease by automating essential server life cycle management tasks with HPE OneView and HPE Integrated Lights Out 5 (iLO 5). Deploy this 2P secure platform for diverse workloads in space constrained environments.
Are you searching for a dense server with exceptional value to run on-premises and hybrid cloud solutions?
The secure 2P 1U HPE ProLiant DL160 Gen10 server delivers the right balance of performance, storage, reliability, manageability and efficiency in a dense and compact chassis, to meet the needs of growing businesses of a diverse set of customers – from SMB to service providers running wide range of workloads at a compelling price point.
Do you need a dense platform with built-in security and flexibility that addresses key applications such as virtualization and software-defined storage (SDS)?
Building on HPE ProLiant as the intelligent foundation for hybrid cloud, the HPE ProLiant DL385 Gen10 server offers the 2nd generation AMD EPYC™ 7000 Series processor delivering up to 2X  the performance of the prior generation. With up to 128 cores (per 2-socket configuration), 32 DIMMs, and 1 TB memory capacity, as well as support for up to 24 NVMe drives, the HPE ProLiant DL385 Gen10 server delivers low cost virtual machines (VMs) with unprecedented security. Combined with a better balance of processor cores, memory and I/O makes the HPE ProLiant DL385 Gen10 the ideal choice for virtualization and memory-intensive workloads.