Are you looking for next-generation Fibre Channel (FC) adapter for the Modern Data Center?
The HPE SN1610E 32Gb FC Host Bus Adapters (HBA) are designed for demanding mission-critical workloads and emerging applications. Applications continue to grow in size and scale. To support them, enterprises are increasingly turning to new server technologies that contain hundreds of processor cores, as well as high-performance storage solutions, including low-latency Non-volatile Memory Express (NVMe), and all-flash arrays (AFAs). NVMe can significantly increase the performance of storage area networks (SANs), making the selection of high-speed networking technology the critical element for achieving maximum system-wide performance.
Compared to the previous generation, the HPE SN1610E FC HBAs offers higher bandwidth, better latency, enhanced security, and operational efficiency for 32 Gigabit Fiber Channel (GFC). It provides seamless backward compatibility to 16 GFC and 8 GFC networks.
HPE Converged Network Adapters (CNAs) are dual port adapters that provide Ethernet, iSCSI, and Fibre Channel (FC) connectivity over 10 GbE/25 GbE using both Fibre Channel over Ethernet (FCoE) and Converged Enhanced Ethernet (CEE) standards. By consolidating Ethernet, iSCSI, and Fibre Channel onto a converged adapter, HPE CNAs reduce the number of separate adapters and cables required for your data center and also reduce operational, power, and cooling costs while preserving existing Ethernet and Fibre Channel infrastructure. HPE CNAs have also been thoroughly tested with HPE ProLiant servers and HPE Top of Rack (ToR) switches to help ensure a better HPE FCoE solution for your data center.
Are you looking for a 100Gb Intel® Omni-Path Adapters for your HPE ProLiant XL and DL Server families?
HPE 100Gb Intel Omni-Path Adapters are designed for customers who deploy High Performance Computing (HPC) systems with their HPE ProLiant XL and DL Server families in the data center. The HPE 100 Gb 1p OP101 QSFP28 x16 OPA Adapter is available today. It is a low-profile PCIe card that supports one QSFP28 port with 100 Gb/s performance. By managing the traffic at a fine-grain Flow Control Digits (FLITs) level, the adapters and switches are able to make extremely granular switching decisions to optimize the performance.
Are you looking for an dual-function FDR InfiniBand and/or 40/50 GbE adapter for your HPE ProLiant XL and DL server families? The HPE InfiniBand FDR/EN Adapters are designed for customers who need low latency and high-bandwidth for high-performance computing (HPC) systems with their HPE ProLiant XL and DL server families in the data center. Based on Mellanox® ConnectX-3 PRO, Connect-IB and ConnectX-5 technology for scalability and fabric flexibility, the dual ported card can function as a dual-port FDR InfiniBand card, a dual-port Ethernet card, or a mixed function card. Combined with HPE FDR InfiniBand Switches or Ethernet Switches, they deliver low latency and up to 50 Gb/s bandwidth. Ideal for performance-driven server and storage clustering applications in HPC and enterprise data centers.
Are you looking for a high-performance Fibre Channel (FC) adapter for the modern storage area network?
With improvements in server performance, increased virtualization, as well as flash and NVMe storage, the existing storage can become the bottleneck in your environment. The FC host bus adapter (HBA) is a critical element of this storage area network to improve storage performance.
The HPE SN1610Q 32Gb Fibre Channel Host Bus Adapter provides significant I/O performance and security benefits to accelerate databases, host more virtual machines, support emerging technologies such as NVMe and reduce total cost of ownership. It delivers better business outcomes across multiple industry verticals that rely on high performance, safe, and reliable storage connectivity for their storage infrastructure.
The HPE QMH2672 16Gb Mezzanine Fibre Channel Host Bust Adapters provide a step into the 16Gb/s future with greater performance and advanced, embedded support for virtualized environments. Their introduction brings SAN infrastructure components to a higher level of performance and efficiency with the ability to deliver twice the I/O performance of 8Gb FC HBAs.
The HPE QMH2672 purchased today is backward compatible with 8Gb storage networks and will protect future investments and provide full port isolation design. When using storage intensive applications , such as backup, database transactions , and virtualization, the increased performance of the HPE QMH2672 enables more rapid storage and retrieval of critical information.
Designed for environments with greater virtual machine density and bandwidth requirements , the HPE QMH2672 enable more applications and virtual machines to run on a single server and port , resulting in reduced cabling and higher return on IT investment.
The HPE LPe1605 16Gb mezzanine Fibre Channel Host Bus Adapter provides superior reliability, exceptional performance, enhanced security, server side NPIV, and scalable management for virtual server and enterprise-class applications. This latest FC HBA delivers twice the I/O performance of 8Gb FC HBAs which is critical for mission critical applications that rely on highly available connectivity.
Emulex's firmware architecture allows firmware to be upgraded without taking the server off-line or re-booting, and without the need to upgrade the driver. As with all Emulex LightPulse Fibre Channel HBAs, the HPE LPe1605 is managed with Emulex OneCommand™ Manager (OCM). This provides a secure, centralized administration console to discover and manage Emulex Fibre Channel HBAs on local and remote hosts.
Are you looking for an HPE EDR InfiniBand Adapter for your HPE ProLiant XL and HPE ProLiant DL Gen9 and Gen10 server families?
The HPE InfiniBand EDR and 100 Gb Ethernet adapters are designed for customers who deploy high performance computing (HPC) systems with their HPE ProLiant XL and DL Gen9 and Gen10 servers in the data center. The HPE InfiniBand EDR and 100 Gb Ethernet adapters include HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter, HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter, HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter, and HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter. The 1-port 841QSFP28 card supports InfiniBand, and the rest of the other cards support both InfiniBand and Ethernet. Combined with EDR InfiniBand or 100 Gb Ethernet switches, they deliver low latency and up to 100Gbps bandwidth, ideal for performance-driven server and storage clustering applications in HPC and enterprise data centers.
Are you looking for a 10Gb Ethernet adapter with configurable flexibility to prepare for the new hybrid server infrastructure?
Increased data center workload demands are putting pressure on server I/O. The HPE FlexFabric 10Gb 2-port FLR-T 57840S Adapter increases throughput for HPE ProLiant Rack Servers and HPE Apollo Servers by using the innovative HPE FlexibleLOM form factor to offer four ports in a 10GBASE-T adapter configuration. The HPE FlexFabric 10Gb 2-port FLR-T 57810S Adapter provides high performance Ethernet connectivity and is ideal for virtual server and cloud computing environments.
Stuck in network traffic at 10Gbps? Time to take the Express Lane with HPE 25GbE Adapters. With the rise in volume of mobile data and video and the frequency in which it’s accessed, legacy technologies are struggling to handle the increased throughput and lack the capabilities to cost-effectively scale. Current approaches to managing the increasing data center traffic require higher bandwidth and are cost prohibitive, keeping organizations from easily growing as their needs grow. The HPE Ethernet 10/25Gb 2-port FLR-SFP28 CX4 Adapter is a FlexibleLOM form factor for select HPE ProLiant Server DL family of rack and HPE Apollo Servers that delivers high-performance solutions to Telco, services providers, financial institutions and enterprises to meet higher bandwidth demand.