HPE SN1610E 32Gb Fibre Channel Host Bus Adapter
Are you looking for next-generation Fibre Channel (FC) adapter for the Modern Data Center?
The HPE SN1610E 32Gb FC Host Bus Adapters (HBA) are designed for demanding mission-critical workloads and emerging applications. Applications continue to grow in size and scale. To support them, enterprises are increasingly turning to new server technologies that contain hundreds of processor cores, as well as high-performance storage solutions, including low-latency Non-volatile Memory Express (NVMe), and all-flash arrays (AFAs). NVMe can significantly increase the performance of storage area networks (SANs), making the selection of high-speed networking technology the critical element for achieving maximum system-wide performance.
Compared to the previous generation, the HPE SN1610E FC HBAs offers higher bandwidth, better latency, enhanced security, and operational efficiency for 32 Gigabit Fiber Channel (GFC). It provides seamless backward compatibility to 16 GFC and 8 GFC networks.
HPE Storage Networking NVME-oF Offload Adapters
Are you looking to modernize your data center with Non-volatile Memory Express (NVMe) paradigms, while insuring the integrity of your data is safe from malicious agents?
HPE Storage Networking NVME-oF Offload Adapters are advanced cloud network interface cards with NVMe offload capabilities and cryptographic functionalities to accelerate mission-critical data center applications such as security, virtualization, SDN/NFV, big data, machine learning, and NVMe-based storage. It provides up to two ports of 100Gb/s Ethernet connectivity paired with proven cryptographic capabilities that accelerate and secure cloud and data center workloads.
Storage acceleration and offloads such as NVMe-oF for RDMA over Converged Ethernet (RoCE) and TCP are built into the adapters, enabling seamless upgrade paths from existing storage paradigms to NVMe and persistent memory semantics.
It also provides enhanced security for your data in an unsecure world.
HPE Gen10 Plus Ethernet Adapters
Is your data center constantly challenged to deliver increased security and reliability in a cost-effective and scalable solution for your network bandwidth?
The HPE Gen10 Plus Ethernet Adapters are 1 Gb, 10 Gb, 10/25 Gb, 100 Gb, and 200 Gb Ethernet solutions that are scalable and compatible with HPE Gen10 Plus servers for hybrid cloud services, mobile data, and streaming video applications.
Your server is the foundation of your data center, but it doesn’t work alone. When one link in your component chain slows down, so does the rest of your operation. Keep your network and data flowing with a seamless ecosystem of HPE servers, networking adapters, transceivers, cables, and switches.
HPE NC532m Dual Port 10GbE Multifunction BL-c Adapter
Looking for a 2 port 10GbE mezzanine adapter card for Virtual Connect on your HPE BladeSystem? The NC532M is a multifunction 10 Gigabit Ethernet network adapter for the ProLiant c-Class BladeSystem. The adapter is a dual port 10GbE mezzanine that when paired with the new 10Gb Virtual Connect Module provides up to eight physical function NICs that can be configured to operate at any speed from 100 Mb/s to 10 Gb/s. The NC532m works as a standard dual port 10GbE NIC when connected to non-Virtual Connect devices such as the HPE 6120XG. The adapter ships with support for VLAN tagging, QoS, teaming (bonding), Receive Side Scaling (RSS), PXE. The NC532m adapter is supported in ProLiant c-class server Type I and II mezzanine slots allowing customers to provision their servers with unprecedented bandwidth never before available in a blade.
QLogic QMH2562 8Gb Fibre Channel HBA for c-Class BladeSystem
The QMH2562 is a PCI Express based 8Gb Fibre Channel mezzanine card for the HPE c-Class BladeSystem that delivers twice the data throughput as the previous generation 4Gb mezzanine card. It is optimized for virtualization, low power usage, management, security, reliability, availability and serviceability. While providing leading edge 8Gb performance, it is also backward compatible with 4Gb and 2Gb Fibre Channel speeds.
HPE Converged Network Adapters
HPE Converged Network Adapters (CNAs) are dual port adapters that provide Ethernet, iSCSI, and Fibre Channel (FC) connectivity over 10 GbE/25 GbE using both Fibre Channel over Ethernet (FCoE) and Converged Enhanced Ethernet (CEE) standards. By consolidating Ethernet, iSCSI, and Fibre Channel onto a converged adapter, HPE CNAs reduce the number of separate adapters and cables required for your data center and also reduce operational, power, and cooling costs while preserving existing Ethernet and Fibre Channel infrastructure. HPE CNAs have also been thoroughly tested with HPE ProLiant servers and HPE Top of Rack (ToR) switches to help ensure a better HPE FCoE solution for your data center.
HPE Ethernet 1Gb 4-port FLR- T BCM5719 Adapter
Do you need low power, high port density 1GbE network adapters for virtualization and server consolidation?
The HPE Ethernet 1Gb 4-port FLR-T BCM5719 Adapter for select HPE ProLiant servers features the next generation of Ethernet integration, offering a single-chip solution in a FlexibleLOM form factor, which offers the option for future upgrades to 10GbE networking speeds. It delivers full line-rate performance across all ports with low power consumption. The adapter is ideal for virtualization, security, server consolidation, network segmentation, and other applications requiring maximum throughput and port density. The total aggregate throughput of 4 Gb meets the needs of customers desiring high bandwidth. The adapter supports advanced features such as Large Send and Receive offload capability, TCP checksum and segmentation, VLAN tagging, MSI-X, jumbo frames, IEEE 1588, HPE Sea of Sensors 3D and virtualization features such as VMware NetQueue and Microsoft VMQ.
Max 4 items can be added for comparison.

Find what you are looking for?