HPE SN1610E 32Gb Fibre Channel Host Bus Adapter
Are you looking for next-generation Fibre Channel (FC) adapter for the Modern Data Center?
The HPE SN1610E 32Gb FC Host Bus Adapters (HBA) are designed for demanding mission-critical workloads and emerging applications. Applications continue to grow in size and scale. To support them, enterprises are increasingly turning to new server technologies that contain hundreds of processor cores, as well as high-performance storage solutions, including low-latency Non-volatile Memory Express (NVMe), and all-flash arrays (AFAs). NVMe can significantly increase the performance of storage area networks (SANs), making the selection of high-speed networking technology the critical element for achieving maximum system-wide performance.
Compared to the previous generation, the HPE SN1610E FC HBAs offers higher bandwidth, better latency, enhanced security, and operational efficiency for 32 Gigabit Fiber Channel (GFC). It provides seamless backward compatibility to 16 GFC and 8 GFC networks.
HPE Gen10 Plus Ethernet Adapters
Is your data center constantly challenged to deliver increased security and reliability in a cost-effective and scalable solution for your network bandwidth?
The HPE Gen10 Plus Ethernet Adapters are 1 Gb, 10 Gb, 10/25 Gb, 100 Gb, and 200 Gb Ethernet solutions that are scalable and compatible with HPE Gen10 Plus servers for hybrid cloud services, mobile data, and streaming video applications.
Your server is the foundation of your data center, but it doesn’t work alone. When one link in your component chain slows down, so does the rest of your operation. Keep your network and data flowing with a seamless ecosystem of HPE servers, networking adapters, transceivers, cables, and switches.
HPE NC532m Dual Port 10GbE Multifunction BL-c Adapter
Looking for a 2 port 10GbE mezzanine adapter card for Virtual Connect on your HPE BladeSystem? The NC532M is a multifunction 10 Gigabit Ethernet network adapter for the ProLiant c-Class BladeSystem. The adapter is a dual port 10GbE mezzanine that when paired with the new 10Gb Virtual Connect Module provides up to eight physical function NICs that can be configured to operate at any speed from 100 Mb/s to 10 Gb/s. The NC532m works as a standard dual port 10GbE NIC when connected to non-Virtual Connect devices such as the HPE 6120XG. The adapter ships with support for VLAN tagging, QoS, teaming (bonding), Receive Side Scaling (RSS), PXE. The NC532m adapter is supported in ProLiant c-class server Type I and II mezzanine slots allowing customers to provision their servers with unprecedented bandwidth never before available in a blade.
QLogic QMH2562 8Gb Fibre Channel HBA for c-Class BladeSystem
The QMH2562 is a PCI Express based 8Gb Fibre Channel mezzanine card for the HPE c-Class BladeSystem that delivers twice the data throughput as the previous generation 4Gb mezzanine card. It is optimized for virtualization, low power usage, management, security, reliability, availability and serviceability. While providing leading edge 8Gb performance, it is also backward compatible with 4Gb and 2Gb Fibre Channel speeds.
HPE Converged Network Adapters
HPE Converged Network Adapters (CNAs) are dual port adapters that provide Ethernet, iSCSI, and Fibre Channel (FC) connectivity over 10 GbE/25 GbE using both Fibre Channel over Ethernet (FCoE) and Converged Enhanced Ethernet (CEE) standards. By consolidating Ethernet, iSCSI, and Fibre Channel onto a converged adapter, HPE CNAs reduce the number of separate adapters and cables required for your data center and also reduce operational, power, and cooling costs while preserving existing Ethernet and Fibre Channel infrastructure. HPE CNAs have also been thoroughly tested with HPE ProLiant servers and HPE Top of Rack (ToR) switches to help ensure a better HPE FCoE solution for your data center.
HPE Ethernet 1Gb 4-port FLR- T BCM5719 Adapter
Do you need low power, high port density 1GbE network adapters for virtualization and server consolidation?
The HPE Ethernet 1Gb 4-port FLR-T BCM5719 Adapter for select HPE ProLiant servers features the next generation of Ethernet integration, offering a single-chip solution in a FlexibleLOM form factor, which offers the option for future upgrades to 10GbE networking speeds. It delivers full line-rate performance across all ports with low power consumption. The adapter is ideal for virtualization, security, server consolidation, network segmentation, and other applications requiring maximum throughput and port density. The total aggregate throughput of 4 Gb meets the needs of customers desiring high bandwidth. The adapter supports advanced features such as Large Send and Receive offload capability, TCP checksum and segmentation, VLAN tagging, MSI-X, jumbo frames, IEEE 1588, HPE Sea of Sensors 3D and virtualization features such as VMware NetQueue and Microsoft VMQ.
HPE Ethernet 1Gb 4-port BASE-T BCM5719 Adapter
Do you need a 1GbE adapter with low power, high port density and virtualization features?
The HPE Ethernet 1Gb 4-port BASE-T BCM5719 Adapter features the next generation of Ethernet integration, offering a single chip solution that reduces power requirements and optimizes I/O slot utilization. It delivers full line-rate performance across all ports with low power consumption. The HPE Ethernet 1Gb 4-port BASE-T BCM5719 Adapter is ideal for virtualization, security, server consolidation, network segmentation, and other applications requiring maximum throughput and port density. The total aggregate throughput of 8 Gb meets the needs of customers desiring high bandwidth. The HPE Ethernet 1Gb 4-port BASE-T BCM5719 Adapter supports advanced features such as Large Send and Receive offload capability, TCP checksum and segmentation, VLAN tagging, MSI-X, jumbo frames, IEEE 1588, and virtualization features such as VMware NetQueue and Microsoft VMQ.
HPE Ethernet 1Gb 4-port FLR-SFP+ I350-T4V2 Adapter
Are you looking for a 4 port 1GbE adapter for your HPE ProLiant Server?
The HPE Ethernet 1Gb 4-port FLR-SFP+ I350-T4V2 Adapter features the next generation of Ethernet integration offering in a single chip solution on a FlexibleLOM form factor, further reducing power requirements for 4 ports of 1 Gb Ethernet. The adapter is the PCI Express 2.1 x4 based on the latest Intel Ethernet Controller I350 designed for use with select HPE ProLiant rack and scalable servers. Its FlexibleLOM form factor means customers now have a choice to meet growing infrastructure needs. It supports advanced features such as Large Send offload capability, TCP checksum and segmentation, VLAN tagging, MSI-X, Jumbo frames, IEEE 1588, and virtualization features such as Intel Virtualization Technology for Connectivity, VMware NetQueue, Microsoft VMQ and WOL, and power management technologies like Energy Efficient Ethernet.
HPE Ethernet 10Gb 2-port BASE-T 57810S Adapter
Are you looking to reduce network congestion and improve cable management? The HPE Ethernet 10Gb 2-port BASE-T 57810S Adapter is a dual-port 10GBASE-T adapter in a PCIe 2.0 compliant form factor. The adapter delivers full line-rate performance across all ports with low power consumption, utilizing CAT 6A UTP cabling with distances up to 100 meters. Providing high performance Ethernet connectivity, it is ideal for virtual server and cloud computing environments. It supports enterprise class features (VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), jumbo frames, PXE boot) and virtualization features (VMware NetQueue and Microsoft VMQ). The adapter's support for HPE Sea of Sensors 3D Technology enhances server performance.
HPE Ethernet 10Gb 2-port FLR-SFP+ X520-DA2 Adapter
Do you need a 10GbE Adapter ideal for server virtualization, consolidating LAN and SAN, video applications, network segmentation and High Performance Computing (HPC)? The HPE Ethernet 10Gb 2-port FLR-SFP+ X520-DA2 Adapter FlexibleLOM adapter features low cost, low power dual port PCIe v2.0 x8 lane adapter. The adapter addresses the demanding needs of the next-generation data center by providing unmatched features for virtualization and scalability with the proven and reliable performance HPE customers have come to expect.
The HPE Ethernet 10Gb 2-port FLR-SFP+ X520-DA2 Adapter enables connections with Direct Attach Copper cables as well as SR fiber optic modules. HPE Ethernet 10Gb 2-port FLR-SFP+ X520-DA2 Adapter supports high performance networking features such as VLAN tagging, low latency interrupts, TCP and UDP checksum offloading, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), WOL, and jumbo frames.
Max 4 items can be added for comparison.

Find what you are looking for?