Do you need rack level power monitoring over the network?
With billing grade accuracy, HPE Metered Power Distribution Units (PDU) are an excellent choice for data centers wanting to make the most of circuit capacity or for co-location facilities needing to precisely track power usage for billing purposes.
HPE Metered PDUs have a low profile single piece design with multiple mounting options and ease of access to rear devices for maintenance. Designed for HPE racks but will also work in a large variety of third party racks as well using standard button and keyhole mounting. They can be installed on either side of the rack with outlets facing the back of the rack for easy access and improved clearance. Also for higher power density they can be installed side by side on both sides of the rack with the outlets facing in towards the center of the rack. HPE Metered PDUs are available in 1U and vertical form factors in single and 3-phase models and are back by HPE's limited 3-year warranty.
Do you need to extend the capacity of your existing data center to support density-optimized systems without challenging the limits of your conventional cooling infrastructure? The HPE Modular Cooling System 200 helps you reap the benefits of high-density systems without the associated power and cooling challenges. This closed-coupled cooling solution removes high levels of heat, even with power consumption up to 55 kW in a single rack. Designed to extend the capacity of your data center, the HPE Modular Cooling System 200 uses modular fans and a dedicated air-to-liquid heat exchanger to cool heated rack components. Using the cooling efficiency of water, the system cools fully populated high-density racks and keeps them free of hot spots.
Do you require basic, reliable power in a flexible form factor that you can place where needed in the rack? With simple 0U and 1U install options, HPE G2 Basic Power Distribution Units (PDUs) allow you to configure access to power in your rack where you need it the most. HPE G2 Basic PDUs provide a low-profile single-piece design for easy access to rear devices for maintenance. Vertical PDUs can be installed on either side of the rack with outlets facing back for easy access and improved clearance. For higher power density configurations, install side by side on both sides of the rack with the outlets facing center. Horizontal/Modular PDUs offer a modular architecture designed for data center customers who want to maximize power distribution and space efficiencies. The Control Unit or core can be mounted in any 1U space or in 0U space on the side of HPE Racks between the RETMA rails. Extension Bars mount directly to the frame so you can configure access to power where you need it.
Are you looking for a rack to fit your compute requirements that is designed to perform at a reasonable price? Take the guesswork out of infrastructure with HPE purpose-built racks. Perfect for the server room or today's modern data center, HPE G2 Advanced Series Racks include a 3000 pound static capacity, design for better air flow, and cable management features. The welded frame is designed for durability and includes a door with greater perforation for better airflow. Designed for scalability, performance and ease of maintenance, G2 Advanced Series Racks include a rear bracket which eases installation and management of cable and power distribution. For those that require greater load capacity, HPE G2 Advanced Series Racks can be fully configured and shipped to your site. The HPE Rack family of products is optimized for your Infrastructure requirements now and in the future.
Do you need more reliable power with advance battery management in a space saving design? HPE Line Interactive Tower Uninterruptible Power Systems deliver clean power with an advanced battery management capability. Computing environments are expected to deal with the frequencies and severities of power outages, increased power demands from the public and private cloud, software as a service (SaaS), and mobile computing plus online services and applications while maintaining tight cost controls. HPE Line Interactive Tower Uninterruptible Power Systems was designed to meet these needs and exceed expectations as the industry requires a reliable, efficient and easy-to-use UPS within your computing environment.
Do you need more reliable power with advanced battery management that can be utilized in either a rack or tower configuration? HPE Line Interactive Rackmount Uninterruptible Power Systems delivers a high-quality backup system that verifies critical systems, retains a continuous flow of power that protects your data, and keeps you connected. Computing environments are expected to deal with the frequencies and severities of power outages, increased power demands from the public and private cloud, software as a service (SaaS), and mobile computing plus online services and applications while maintaining tight cost controls. The HPE Line Interactive Rackmount Uninterruptible Power Systems safeguards the steady flow of clean and protected power within your computing environment that has the optional capacity to manage your IT equipment while running at peak power efficiency.
Looking for a simple and intuitive solution that allows you to access and manage servers in your data center? HPE Advanced Analog KVM console switches allow you to view and manage up to 256 rackmount servers through a single user interface. They utilize a local On-Screen Display (OSD) interface, accessed through a rack console such as the HPE LCD8500, that provides intuitive menus for accessing each attached server or serial managed device. HPE Advanced Analog KVM console switches support an optional USB Remote Access Key that allow you to upgrade to KVM-over-IP functionality, providing remote access and management via the On-Board Web Interface (OBWI). Standard rack mounting of the console switch will share 1U (1.75-inch) of front panel rack space with the rack console. However, each model can also be mounted in a ""zero U"" profile by mounting in the side rails of the rack.
Need remote access to servers and other serial managed devices in the rack?
HPE Enterprise Serial Console Servers provide remote access to headless servers such as those running Linux or UNIX, as well as serial managed devices such as network switches and routers. Available options support either 16 or 48 devices through a single IP address using any SSH or telnet client. With its powerful user access control and streamline management from the Virtual Media option, the HPE Serial Console Server grants access to specified users or even implements Lightweight Directory Access Protocol (LDAP) directory authentication while allowing servers to access storage media. Security for servers is controlled by user names, passwords, access rights configured and stored in non-volatile memory in the Serial Console Server for up to 64 users or through RADIUS. The HPE Serial Console Servers offer the security, flexibility, and efficiency that meets the needs of the most demanding IT environments.