Yükleniyor...
true

Solutions/Configure

Base Models

Features

Specifications

Additional Resources

Hizmetler

Daha Fazla Bilgi

Sıralama ölçütü:
2 öğeden 1 ila 2

HPE Networking Comware Switch 48P 100M/1G/2.5G/5G/10GBase‑T PoE8 4QSFP+ 1 Slot 5600HI

S0S35A

 

HPE Networking Comware Switch 24P Multigigabit 100M/1G/2.5G/5G/10GBase‑T PoE8 1 Slot 5600HI

S0S34A

 

Yenilikler

  • Multigigabit 100M/1/2.5/5/10G options with PoE8. Granular, higher throughput, and switching capacity of up to 600 Mpps and 1440 Gbps, higher traffic rates and improved network performance.
  • DRNI combines multiple physical switches into one virtual distributed-relay system for doubling aggregate bandwidth, faster forwarding, resiliency, and high availability.
  • Industry-standard MACsec AES 256 support, higher MAC port binding, AAA authentications (including RADIUS authentication), and link group capacity for improved end-to-end network security.
  • iNQA measures network packet loss performance and provides visibility into real-time application performance and health.
  • SmartMC provides centralized network management and maintains dispersed network edge devices at no additional cost.
  • VXLAN and EVPN enable both isolation and greater scalability of L2/L3 overlay services and multicast.

Önemli Özellikler

Multigigabit PoE8 High-density Switches

HPE FlexNetwork 5600 HI Switch Series provides medium and large enterprise networks with 24/48 port 1G/2.5G/5G/10GBASE-T connectivity options, thereby resulting in high density and flexibility.

90W PoE8 supports a wide variety of applications such as virtual desktop infrastructure (VDI) or Internet of Things (IoT).

Delivers up to 600 Mpps of packet forwarding rate and up to 1440 Gbps of port switching capacity for improved network performance.

Supports jumbo frames with a frame size of up to 10000 bytes while improving the performance of large data transfers.

Supports equal-cost multipath that enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth.

Highly Available and Scalable Access Layer Switches

The HPE FlexNetwork 5600 HI Switch Series uses IRF that supports virtualization of up to nine physical switches into one logical device for simpler, flatter, and more agile networks.

DRNI, an IEEE standard-based solution, enables link aggregation from multiple switches to implement device-level link backup for node redundancy. DRNI also simplifies network topology by virtualizing two physical devices into a logical device.

Dual, redundant, and hot-swappable power supplies maintain a dynamic and highly available network.

Virtual Routing Redundancy Protocol (VRRP) is available where groups of two routers can dynamically back each other up to create highly available routed environments.

VXLAN and EVPN allow greater flexibility to integrate into existing networks, better scalability without redesigning the underlay network, enhanced security to restrict attacks, and improved performance specially in spine-leaf architectures.

Rich QoS Features

The HPE FlexNetwork 5600 HI Switch Series supports operations, administration, and maintenance (OAM), MPLS, VPLS, and In-Service Software Upgrade (ISSU) for business continuity and improving manageability.

Advanced classifier based QoS is available to group traffic using multiple match criteria based on Layer 2 and 3 information; it applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or the entire switch.

Extensive traffic prioritization with strict priority (SP) queuing, weighted round robin (WRR), weighted deficit round robin (WDRR), SP+WDRR, and SP+WRR are supported.

Broadcast control and limitation of broadcast traffic rate can reduce unwanted network traffic.

Comprehensive Security and Simplified Management

HPE FlexNetwork 5600 HI Switch Series supports AAA authentication (including RADIUS authentication) and dynamic or static binding of user identifiers such as user account, IP address, MAC address, VLAN, and port number for increased security.

Supports methods including 802.1X and MAC authentication and encryption for greater device security and policy-driven application authentication, along with per-user access control Lists (ACLs) that provide identity-driven security and access control.

Dynamic ARP protection with functions such as ARP detection and ARP packet validation that block broadcasts from unauthorized hosts, prevent eavesdropping or theft of network data.

Single-pane management via HPE IMC provides a consistent network experience and OpenFlow enables integration with mainstream cloud platforms or a third-party controller for flexible network customization and automated management.

SmartMC, an embedded network management tool, supports a web-based GUI to simplify operations and facilitate centralized management at no additional cost. It offers features such as configuration backup, software version management, and seamless switch replacement.

* Tahmini fiyat, katma değer vergisi dahildir.

Size nasıl yardımcı olabiliriz?

İhtiyacınız olduğunda tavsiye alın, yanıt ve çözümlere ulaşın. Genel sorular için, bize şu adresten e-posta gönderin: hpestore.quote-request@hpe.com

Aradığınızı bulabildiniz mi?

İşletmeniz için doğru ürünü bulma konusunda yardıma mı ihtiyacınız var?

Ürün uzmanlarımız, fırsatları ortaya çıkaran ve işletmenizin sorunlarını çözen ürünler ve hizmetleri bulmak için sizinle görüşmekten memnuniyet duyacaktır.

Teklif almak için bir ülke seçin

Lütfen bir ülke seçin.

Karşılaştırma için en fazla 4 öğe eklenebilir.