2
Resim gerçek üründen farklı olabilir
HPE StoreEver MSL3040 SplKt Upg Stup SVC
HPE StoreEver MSL3040 Tape Library Spooler Upgrade Startup service is designed to upgrade your existing HPE StoreEver MSL3040 Tape Library Base Module, versions Q6Q62A and Q6Q62B, by replacing the spooling mechanism and enabling the tape library to have additional storage capacity.
The spooling mechanism upgrade provides the capability for up to 15 modules to be added to your existing HPE StoreEver MSL3040 Tape Library Base Module. The spooler upgrade will allow the capability to install up to seven expansion modules above and up to eight expansion modules below the base library module, with up to 48U rack height maximum
HPE StoreEver MSL3040 Tape Library Base Module SKU: Q6Q62A
Maximum number of expansion modules: 6
Maximum tape cartridges: 272
HPE StoreEver MSL3040 Tape Library Base Module SKU: Q6Q62B
Maximum number of expansion modules: 6
Maximum tape cartridges: 280
HPE StoreEver MSL3040 Tape Library Base Module SKU: Q6Q62A with S0D78A installed
Maximum number of expansion modules: 15
Maximum tape cartridges: 632
HPE StoreEver MSL3040 Tape Library Base Module SKU: Q6Q62B with S0D78A installed
Maximum number of expansion modules: 15
Maximum tape cartridges: 640
Başlayın
- Kısa Özellikler
-
Önemli Özellikler
Service planning and coordination
An HPE service specialist will plan the necessary activities, including the identification of any prerequisites (see “eligibility” section) and schedule the delivery of the service at a time mutually agreed upon by Hewlett Packard Enterprise and the Customer.
The HPE service specialist will provide the planning and coordination activities detailed in this table, either remotely or on-site, at HPE’s discretion
Service planning and coordination activities include:
• Verifying prerequisites using the predelivery checklist
• Reviewing the SAN connectivity and supportability of the intended HPE StoreEver MSL3040 Tape Library Base Module
• Delivering a brief consultation to guide the Customer
Upgrade activities
The spooling mechanism upgrade is performed in three steps:
• Documenting the library configuration
• Replacing the spooling mechanism
• Enabling the configuration
Documenting the library configuration: An HPE service specialist will record the existing HPE StoreEver MSL3040 Tape Library Base Module hardware configuration, and update the library firmware (if necessary), prior to performing the following tasks:
Replacing the spooling mechanism:
• Power off the library
• Remove the magazine
• Prepare and then remove the robotic assembly and spooling mechanism from the base module
• Install the robotic assembly and spooling mechanism into the base module and completing robotic installation
• Power on the library
Enabling the configuration: Verify the upgrade procedure
Validation
An HPE service specialist will run the HPE standard validation tests required for this service and specific to the product being upgraded.
Customer orientation
On the same day as the upgrade services are performed, an HPE authorized service specialist will conduct a high-level review not to exceed one hour to show the functionality of the upgraded components and their operation
* Tahmini fiyat, katma değer vergisi dahildir.
Aradığınızı bulabildiniz mi?
İşletmeniz için doğru ürünü bulma konusunda yardıma mı ihtiyacınız var?
Ürün uzmanlarımız, fırsatları ortaya çıkaran ve işletmenizin sorunlarını çözen ürünler ve hizmetleri bulmak için sizinle görüşmekten memnuniyet duyacaktır.