Juniper Switching Solutions

The EX4300 switches are fixed-configuration platforms that satisfy a variety of high-performance campus and data center access needs. They offer IEEE 802.3af Power over Ethernet (PoE) or 802.3at PoE+ ports up to 30W.

The EX4300 is cloud-ready and ZTP-enabled, so you can onboard, configure, and manage it with Juniper Wired Assurance for improved connected-device experiences. In addition, the Juniper Mist Cloud streamlines deploying and managing your campus fabric, while Mist AI simplifies operations and improves visibility into the performance of connected devices. EX4300 switches support Juniper’s Virtual Chassis technology, enabling any combination of up to 10 EX4300 and EX4600 switches to be interconnected and managed as a single logical device for a highly scalable, cost-effective solution in 1GbE or mixed 1GbE/10GbE/40GbE environments.

The QFX5220 Switch supports very large, dense, and fast data center fabrics that are based on proven Internet-scale technology. It offers flexible 10GbE, 25GbE, 40GbE, 100GbE, 200GbE, and 400GbE interfaces for server and intra-fabric connectivity. The QFX5220 is an optimal choice for spine-and-leaf deployments in enterprise, service provider, and cloud provider data centers, as well as routing use cases in metro environments.

Meet the foundation of your AI data center. The QFX5240 Switch leverages Broadcom Tomahawk 5 silicon to provide 800GbE—twice the capacity of the previous generation. It’s built for the advanced networking requirements of large-scale clusters, and works with Apstra Data Center Director to assure daily operation in AI and ML workload training and access. QFX5240 Switches deliver high-density 800GbE ports in a 2U fixed form factor with software to provide advanced network services tuned to the specific needs of AI/ML workloads. As a cornerstone of AI networks, these switches deliver fast job completion time (JCT) to accelerate training through high GPU utilization.

The QFX5230 Switch supports high-speed, high-density, spine-and-leaf IP fabrics. Use cases include AI data center networking deployments with AI/ML workloads where scalability, performance, and low latency are critical.
The switch offers 400GbE, 200GbE, 100GbE, 50GbE, 40GbE, 25GbE, and 10GbE connections and features such as advanced Layer2/Layer 3 capabilities and secure zero-touch provisioning. The QFX5230 enables network operators to build large, next-generation IP fabrics based on a proven, Internet-scale software suite with best-in-class automation capabilities.

The Juniper AP24 integrates support for 802.11ax, Mist AI, and an omnidirectional Bluetooth LE (BLE) antenna to automate network operations and boost performance in the 6-GHz band. The Wi-Fi 6E wireless access point helps optimize operator and user experiences with secure client-to-cloud automation, insight, and data-driven actions.

The AP24 is a tri-band-capable, dual-band-concurrent device that supports two transmit/receive spatial streams. Managed by the Juniper Mist cloud architecture, it delivers real-time network data and asset visibility services with no need for battery-powered beacons or manual calibration.

The Juniper AP32 access point integrates Mist AI for AX capabilities to automate network operation and boost Wi-Fi performance, delivering an aggregate data rate up to 3.0 Gbps concurrently on both 2.4GHz and 5GHz radios.

With the support of omnidirectional Bluetooth antenna and SuperBeacon, the AP32 series provides real-time network insights and asset location services without the need for battery-powered BLE beacons and manual calibration.

Managed by the Juniper Mist cloud architecture, the AP32 series delivers unprecedented user experiences at a lower cost for retail, warehouse, school, clinic, and home-office environments.

Learn more about the Juniper Mist cloud services that run on the AP32: Wi-FI Assurance, Wired Assurance, Premium Analytics, Marvis Virtual Network Assistant, User Engagement, and Asset Visibility.

The Juniper AP33 access point integrates Mist AI for AX capabilities and a dynamic virtual Bluetooth LE (vBLE) antenna array to automate network operation and boost Wi-Fi performance, while providing real-time network insights and location services, including user engagement, asset location, and contact tracing applications. This is achieved without the need for battery-powered BLE beacons and manual calibration. The AP33 access point supports an aggregate data rate up to 3.0 Gbps concurrently.

Managed by the Juniper Mist cloud architecture, the AP33 access point delivers unprecedented user experiences at a lower cost for retail, warehouse, school, clinic, and home-office environments.

Learn more about the Juniper Mist cloud services that run on the AP33: Wi-FI Assurance, Wired Assurance, Premium Analytics, Marvis Virtual Network Assistant, User Engagement, and Asset Visibility.

The Juniper AP34 integrates Mist AI for AX and an omnidirectional Bluetooth antenna to automate network operations and boost performance in the 6GHz band. The Wi-Fi 6E device helps optimize operator and user experiences with secure client-to-cloud automation, insight, and data-driven actions.  

The AP34 is a tri-band device that supports two transmit/receive spatial streams. Managed by the Juniper Mist Cloud Architecture, it delivers real-time network data and asset location services with no need for battery-powered beacons or manual calibration.

The EX2300 Ethernet Switch delivers a compact, high-density, cost-effective solution for small network environments where space and power are at a premium. With a small, 1 U footprint, the EX2300 is perfect for access-layer deployments in micro branches, retail and workgroup environments, and converged network access in larger networks.

The EX2300 is cloud-ready and ZTP-enabled, so you can onboard, configure, and manage it with Juniper Wired Assurance for improved connected-device experiences. In addition, the Mist platform’s cloud streamlines deploying and managing your campus fabric, while Marvis AI simplifies operations and improves visibility into the performance of connected devices. EX2300 switches support Juniper’s Virtual Chassis technology, which simplifies operations by interconnecting up to four switches that can be managed as a single logical device.

The Juniper AP43 high-performance Wi-Fi 6 ( 802.11ax) access point integrates patented virtual Bluetooth LE (vBLE) and Internet of Things (IoT) capabilities to deliver unprecedented user experiences.

The AP43 Series works in conjunction with the Juniper Mist Cloud Architecture driven by Mist AI to collect and analyze metadata in near real-time from all wireless clients. This enables rapid problem detection and root cause identification with predictive recommendations and proactive troubleshooting.

The AP43 Series has a dynamic vBLE 16-element antenna array for the industry’s most accurate and scalable location services, including user engagement, asset visibility, and contact tracing applications. This is achieved without the need for battery-powered BLE beacons and manual calibration. With integrated IoT sensors and an interface port that can control analog/digital devices, the AP43 Series also enables advanced location-based use cases, such as meeting room booking, door locking and camera control.

Learn more about the Juniper Mist cloud services that run on the AP43: Wi-FI Assurance, Wired Assurance, Premium Analytics, Marvis Virtual Network Assistant, User Engagement and Asset Visibility.