Fraud Detection and Security

Optimize rack scale power and increase efficiency with the HPE Apollo Power Shelf. This 1.5U shelf supplies 14.4 kW or 15.9 kW of power supporting 1-3 HPE Apollo a6000 Chassis depending on power load. Choose from single or 3-phase AC input for 12 x 12V DC cables from the HPE Apollo Power Shelf to the chassis.

Each HPE Apollo Power Shelf can hold up to 6 power supplies: 2650W Platinum hot-plug (15.9 kW non-redundant) or 2400W Platinum hot-plug (14.4 kW non-redundant). Choose from N, N+1, and N+N redundancy configurations to meet your workload needs.

HPE Advanced Power Management simplifies rack, chassis, server and component-level power monitoring and management, so you can get both the best performance and the highest level of efficiency.

Fuel ground breaking research in science and engineering with leading edge technology, while going greener than ever before. The HPE ProLiant XL750f Gen9 Server supports NVIDIA® Tesla® K40 XL GPUs. Applications that benefit from GPUs include seismic processing, biochemistry simulations, weather and climate modeling, image, video and signal processing, computational finance, computational physics, CAE, CFD, and data analytics.

The HPE Apollo 8000 System reaches new heights of performance density, with 4x the teraflops per square foot and up to 40% more FLOPs per watt than comparable air cooled servers. [1] At the same time, the HPE Apollo 8000 System helps reduce your carbon footprint, saving up to 3,800 tons of CO2 per year. [2] That’s about the same amount of CO2 produced per year by 790 cars!

Do you need a cost-effective data center system that can keep pace with your growth and provide flexibility to adapt to various workloads? The HPE Apollo 2000 Gen10 system is designed as an enterprise level, density-optimized, 2U shared infrastructure chassis for up to four HPE ProLiant Gen10 hot-plug servers with all the traditional data center attributes—standard racks and cabling and rear-aisle serviceability access. Server nodes can be serviced without impacting operation of other nodes in the same chassis to provide increased server uptime. A 42U rack fits up to 20 HPE Apollo 2000 system chassis, accommodating up to 80 servers per rack. It delivers the flexibility to tailor the system to the precise needs of your workload with the right compute, flexible I/O, and storage options. The servers can be “mixed and matched” within a single chassis to support different applications, and it can even be deployed with a single server, leaving room to scale as customer's needs grow.

The HPE Apollo a6000 Chassis provides power, cooling, and I/O infrastructure to support HPE ProLiant XL Servers and options today and for years to come. This 5U chassis holds up to 10 server trays vertically and fits in a standard rack. The Innovation Zone in the back of the chassis holds up to 10 I/O modules, with dual HPE FlexibleLOMs supporting 1GbE or 10GbE. Power is delivered through an external 1.5U power shelf (14.4 kW or 15.9 kW) supporting up to 6 chassis depending on power load. Choose from single or 3-phase AC input, with 12 x 12V DC cables from the power shelf to the chassis. An HPE Advanced Power Management module helps optimize rack, chassis, and server power insight and management.

Need an easy to manage solution that can scale at your high performance computing (HPC) demands? The HPE Apollo k6000 Chassis is designed with density optimization and HPC solution integration in mind to address these demands. The new modular, fully integrated, and highly flexible chassis is designed to hold the Hewlett Packard Enterprise Gen10 compute servers to fit your specific HPC workloads. It accommodates up to 24 HPE ProLiant XL230k Gen 10 Server trays, redundant power and cooling, Ethernet and high speed fabric switches to address various HPC workload needs. It is a performance optimized, air-cooled solution that fits in customer’s space limitations. This solution offers outstanding configuration flexibility, simplified administration and rack-scale efficiency that lowers the total cost of ownership (TCO) needed for mass scale HPC deployments.

Do you need a server platform for your data intensive workloads that can scale per your needs?

The HPE ProLiant XL250a Gen9 Server delivers 2P performance for your budget with dual accelerator support, while leveraging the HPE Apollo 6000 System and its modular flexibility and rack-scale efficiency.

This server features the Intel® Xeon® E5-2600 v3/v4 series processors and 16 DIMM slots are ready with DDR4 2133 (1024 GB maximum)/2400 (2048 GB maximum) MHz memory and HPE SmartMemory.

The modular HPE Apollo 6000 Chassis can accommodate up to ten server trays, with the flexibility to choose from various trays, HPE ProLiant XL250a Gen9 Server with accelerators, HPE ProLiant XL230a Gen9 Server, or a combination of server trays to meet workload needs while lowering TCO.

The HPE Apollo 6000 Power Shelf drives rack scale power efficiency, while the Hewlett Packard Enterprise Advanced Power Manager provides real-time power measurements and enables rack-level dynamic power capping.

Do you need a server platform for extreme high performance computing (HPC) workloads that can scale with your business growth?

The HPE ProLiant XL230k Gen10 server delivers extreme compute performance using leading edge technologies needed to handle complex HPC workloads in enterprise data centers. This server leverages the latest 2nd generation Intel® Xeon® Scalable processors along with up to 2933 MT/s DDR4 HPE SmartMemory. This modular, fully integrated, and highly flexible HPE Apollo k6000 Chassis accommodates up to 24 HPE ProLiant XL230k Gen10 server trays, Ethernet and high-speed fabric switches to address various HPC workload needs. The HPE Apollo 6000 Gen10 System is a performance-enhanced, air-cooled solution that offers outstanding configuration flexibility, redundant power, simplified administration and rack-scale efficiency to lower the total cost of ownership (TCO) needed for mass scale HPC deployments.

Are you looking for a compute-intensive server node for your HPE Apollo 2000 Gen10 System that includes support for separate graphic processing unit (GPU) processors?

The HPE ProLiant XL190r Gen10 server deployed in the HPE Apollo 2000 Gen10 System delivers a dense solution with flexibility for up to two hot-pluggable server nodes in a standard 2U chassis. Each HPE ProLiant XL190r Gen10 server node can be serviced individually without impacting the operation of other nodes sharing the same chassis to provide increased server uptime.

The server node harnesses the performance of 2933 MT/s HPE DDR4 SmartMemory (16 DIMM slots per node) and dual Intel® Xeon® Scalable processors in a very efficient solution that shares both power and cooling infrastructure. It provides accelerated application performance with up to four GPU cards per HPE ProLiant XL190r Gen10 server. HPE Apollo 2000 Gen10 System delivers storage flexibility with options that support 12 SFF or 6 LFF HDD/SSD or 8 NVMe SSD.

Do you need a flexible and dense storage system for your scale-out object storage, backup and archive, or data analytics solution?
The HPE Apollo 4510 Gen10 System offers revolutionary storage density in a 4U form factor. Fitting in HPE standard 1075 mm rack, with one of the highest storage capacities in any 4U server with standard server depth. When you are running Big Data solutions, such as object storage, data analytics, content delivery, or other data-intensive workloads, the HPE Apollo 4510 Gen10 System allows you to save valuable data center space. Its unique, density-optimized 4U form factor holds up to 60 large form factor (LFF) drives plus an additional two hot-plug small form factor (SFF) and/or internal M.2 drives. For configurability options, the LFF and SFF slots support SAS or SATA disk drives and SSDs, while the SFF and M.2 slots also support NVMe drives.

Do you need increased computing performance for high performance computing (HPC) and deep learning?

The HPE Apollo 6500 Gen10 System is an ideal HPC and deep learning platform providing unprecedented performance with industry-leading¹ GPUs, fast GPU interconnect, high bandwidth fabric, and a configurable GPU topology to match your workloads. The ability of computers to autonomously learn, predict, and adapt using massive data sets is driving innovation and competitive advantage across many industries and applications are driving these requirements. The system with rock-solid reliability, availability, and serviceability (RAS) features includes up to eight GPUs per server, NVLink for fast GPU-to-GPU communication, Intel® Xeon® Scalable processors support, choice of high-speed / low latency fabric, and is workload enhanced using flexible configuration capabilities. While aimed at deep learning workloads, the system is suitable for complex simulation and modeling workloads.