Host Adapters

Do you want to improve your performance and bandwidth without increasing your hardware complexity?

The HPE Synergy 6810C 25/50Gb Ethernet Adapter provides more than two times the bandwidth compared to 10/20Gb adapters. Therefore, it simplifies hardware implementation by reducing the number of adapters, associated switches and compute modules required to achieve higher bandwidth.

The networking acceleration on this adapter alleviates the CPU utilization, increases the number of virtual machines (VMs) placed on each server, and improves the cloud scale efficiency. Pairing with the Hewlett Packard Enterprise Synergy high-density 50G Ethernet switching solution, this adapter provides high throughput and low latency to implement intelligent and flexible networks.

Are you looking for a 100Gb Intel® Omni-Path Adapters for your HPE ProLiant XL and DL Server families?

HPE 100Gb Intel Omni-Path Adapters are designed for customers who deploy High Performance Computing (HPC) systems with their HPE ProLiant XL and DL Server families in the data center. The HPE 100 Gb 1p OP101 QSFP28 x16 OPA Adapter is available today. It is a low-profile PCIe card that supports one QSFP28 port with 100 Gb/s performance. By managing the traffic at a fine-grain Flow Control Digits (FLITs) level, the adapters and switches are able to make extremely granular switching decisions to optimize the performance.

Are you looking for a simple way to migrate to 10G high performance data center with low cost and low power in your data center? The HPE Ethernet 10Gb 2-port X550-AT2 Adapter deliver high performance and low latency for Ethernet traffic to and from the server with minimal CPU resources required. Processing of I/O packets on the adapter frees up CPU to do other more important tasks. For environments such as Telco/NFV, high-performance computing (HPC) and ecommerce that deal with large volumes of small packet traffic, these adapters accelerate small packet processing by bypassing processing in the host O/S kernel.

Do you need a 1GbE adapter with low power, high port density and virtualization features?

The HPE Ethernet 1Gb 4-port BASE-T BCM5719 Adapter features the next generation of Ethernet integration, offering a single chip solution that reduces power requirements and optimizes I/O slot utilization. It delivers full line-rate performance across all ports with low power consumption. The HPE Ethernet 1Gb 4-port BASE-T BCM5719 Adapter is ideal for virtualization, security, server consolidation, network segmentation, and other applications requiring maximum throughput and port density. The total aggregate throughput of 8 Gb meets the needs of customers desiring high bandwidth. The HPE Ethernet 1Gb 4-port BASE-T BCM5719 Adapter supports advanced features such as Large Send and Receive offload capability, TCP checksum and segmentation, VLAN tagging, MSI-X, jumbo frames, IEEE 1588, and virtualization features such as VMware NetQueue and Microsoft VMQ.

Are you looking for a 4 port 1GbE adapter for your HPE ProLiant Server?

The HPE Ethernet 1Gb 4-port FLR-SFP+ I350-T4V2 Adapter features the next generation of Ethernet integration offering in a single chip solution on a FlexibleLOM form factor, further reducing power requirements for 4 ports of 1 Gb Ethernet. The adapter is the PCI Express 2.1 x4 based on the latest Intel Ethernet Controller I350 designed for use with select HPE ProLiant rack and scalable servers. Its FlexibleLOM form factor means customers now have a choice to meet growing infrastructure needs. It supports advanced features such as Large Send offload capability, TCP checksum and segmentation, VLAN tagging, MSI-X, Jumbo frames, IEEE 1588, and virtualization features such as Intel Virtualization Technology for Connectivity, VMware NetQueue, Microsoft VMQ and WOL, and power management technologies like Energy Efficient Ethernet.

Do you need an adapter that is big on capability and small on CPU utilization?

The HPE Ethernet 10Gb 2-port SFP+ BCM57414 Adapter has been designed to efficiently deliver high performance, low latency and minimal CPU utilization by offloading many I/O processing within the adapter. Low latency dramatically improves application performance and frees up CPU resources in the host allowing it to do more important tasks

What if you could increase I/O performance and improve network efficiency between HPE Synergy Compute sodules and complex storage environments? Designed for the HPE Synergy Composable Fabric, HPE Synergy 5330C 32Gb Fibre Channel Host Bus Adapter (HBA) connects HPE Synergy Compute resource pools to SANs over 32 Gb native FC fabrics. It provides both high-performance and network efficiency. High performance is achieved through low latency connectivity to HPE Synergy Virtual Connect FC Modules and Brocade® FC Switch Modules while network efficiency is achieved through the HPE Synergy Composer automatically coordinating proper firmware and driver including staging updates to execute and avoid workload disruption

Do you require SDN features, low-latency and high-bandwidth in your data center? TheHPE Ethernet 10Gb 2-port FLR-SFP+ X710-DA2 Adapter offers the latest SDN features in a FlexibleLOM form factor. The HPE Ethernet 10Gb 2-port FLR-SFP+ X710-DA2 Adapter is a feature rich, low power dual port PCIe v3.0 x8 lane adapter designed for use in HPE ProLiant Rack and Density Optimized servers.

Do you want flexibility while being efficient? The HPE Synergy 4820C 10/20/25Gb Converged Network Adapter provides a path for 10G today and up to 25Gb tomorrow for Financial, trading, Telco and cloud service providers. This adapter converges Ethernet and FCoE onto a single connection simplifying hardware and reducing costs. Pairing with the Hewlett Packard Enterprise Synergy Switch solution, this adapter provides high throughput and low latency to implement intelligent and flexible networks connecting the server to the switch.