HPE XP7 Gen2 14TB Upgrade Flash Module Device
The HPE XP7 Flash Module Device is a FMD unique to XP7. It combines MLC NAND flash and a SAS interface with a custom ASIC controller for superior flash performance. The FMD form factor is larger than traditional SSD and therefore is available in capacities of 1.7 TB, 3.5 TB, 7 TB and 14 TB. They are configurable in a variety of RAID types in the same fashion as other drives and is compatible with all XP7 firmware and software features.
The XP7 Flash Module Device supports wear levelling. In a flash memory each write or erase cycle stresses the cell which in turn causes deterioration of the cell over time. This might cause an imbalance in the cell activity which creates an irregular distribution of these unstable cells thereby impacting the life of flash.
The flash controller monitors the number of writes, erasures and refreshes to eliminate these imbalances by balancing the rate of deterioration in the flash memory cells. This helps in extending the useful lifetime of flash.
SKU # H6G73DU
Contact Us
Chat with usMaximize your HPE XP7 Flash Modules
What's New
- Inline hardware compression in the FMD ASIC driving storage efficiency and performance for mission critical flash requirements.
- The FMDs comes in capacity points of 1.7 TB, 3.5 TB,7 TB and the newly introduced 14 TB.
- The quad core controller on the XP7 FMDs provides: higher performance, reduced array write cache needs, a longer projected lifespan (endurance), and storage efficiency through compression.
- Gen2 FMDs are also more flexible capacity/density packaging than all other standard SSDs available on the market today.
- Mission critical affordable flash with world class performance at sub $2/Gb, driving flash to go mainstream in mission critical environments.
The Flash Module Device (FMD) unique to HPE XP7 is the driver for industry-leading performance and is designed for those customers seeking the ultimate in storage performance.
Show More {"title":"Enterprise Flash at Less Than $2/Gb","keyList":["The Flash Module Device (FMD) unique to HPE XP7 is the driver for industry-leading performance and is designed for those customers seeking the ultimate in storage performance.","With an XP7 configuration using just 64 FMD’s a stellar SPC-1 result of 2M IOPS at .96 ms response time was achieved.","Inline hardware compression that provides over 2:1 compression ratio with zero performance penalty and a density increase to 14 TB per FMD.","The XP7 Gen2 FMD is the flash media of choice as 3 million plus IOPS at sub-millisecond response times is what you can expect along with compression savings of over 2:1 when using HPE XP7 Gen2 FMD.","All this at a price point that trumps traditional SSD media in bit cost."]}