Installation and Startup for Software Service

HPE Firmware Update Analysis Service provides recommendations for firmware revision levels for selected HPE servers, storage products, network devices, and solutions, taking into account the relevant revision dependencies within your IT environment.

This service is sold as a block of four (4) hours of HPE Firmware Update Analysis Service work on a per-product basis. Your Hewlett Packard Enterprise sales representative will work with you to estimate the quantity of service product numbers recommended for your HPE product(s). HPE will perform service for the selected product based up the service features described in this document and will work toward the provision of them up to a maximum of four (4) hours. Additional service hours may be required to complete a firmware update analysis engagement for the selected product.

Maintaining current firmware revisions of HPE products can provide you with enhancements and help you avoid known problems. However, determining the correct firmware revisions and evaluating compatibility with other software and hardware within the IT infrastructure can be a complex process. Hewlett Packard Enterprise service specialists will help you evaluate the compatibility of certain selected non-HPE products with the HPE firmware product for which these service are purchased, and will work with you to help determine the appropriate HPE firmware updates needed. Please contact HPE for further information regarding the list of selected non-HPE products that may be evaluated as part of this service.

This service does not include firmware updates or the right to any firmware updates. Recommendations do not mean that such updates are available to customers, even if they are under a current support agreement with HPE. Customers may still need to purchase additional support contracts for recommended products. This service does not include the right to any updates. Please contact your Hewlett Packard Enterprise representative for information regarding the selected products for which this service is available.

HPE Firmware Update Analysis Service provides recommendations for firmware revision levels for selected HPE servers, storage products, network devices, and solutions, taking into account the relevant revision dependencies within your IT environment.

This service is sold as a block of four (4) hours of HPE Firmware Update Analysis Service work on a per-product basis. Your Hewlett Packard Enterprise sales representative will work with you to estimate the quantity of service product numbers recommended for your HPE product(s). HPE will perform service for the selected product based up the service features described in this document and will work toward the provision of them up to a maximum of four (4) hours. Additional service hours may be required to complete a firmware update analysis engagement for the selected product.

Maintaining current firmware revisions of HPE products can provide you with enhancements and help you avoid known problems. However, determining the correct firmware revisions and evaluating compatibility with other software and hardware within the IT infrastructure can be a complex process. Hewlett Packard Enterprise service specialists will help you evaluate the compatibility of certain selected non-HPE products with the HPE firmware product for which these service are purchased, and will work with you to help determine the appropriate HPE firmware updates needed. Please contact HPE for further information regarding the list of selected non-HPE products that may be evaluated as part of this service.

This service does not include firmware updates or the right to any firmware updates. Recommendations do not mean that such updates are available to customers, even if they are under a current support agreement with HPE. Customers may still need to purchase additional support contracts for recommended products. This service does not include the right to any updates. Please contact your Hewlett Packard Enterprise representative for information regarding the selected products for which this service is available.

HPE Remote Advanced Configuration Service is available to customers who find themselves in need of access to technical product expertise on HPE networking equipment. These advanced configuration services cover wired, wireless, and routing networking products. Upon receipt of an acceptable order, the services can be purchased while working with an engineer over the phone, or they can be purchased and scheduled for future delivery.

This service is limited to configuration advisory services only; it does not include activities such as onsite installation and deployment-related activities, which are part of a separate service

HPE SimpliVity 380 Remote Deployment Service ensures the successful implementation of your HPE SimpliVity 380 hyper converged infrastructure. Our remote experts will guide you through every step of the process to jumpstart your investment, support your IT staff, and accelerate time-to-value. This service provides planning, service deployment, installation verification testing (IVT), and an orientation session to facilitate deployment of the features and functionality of an HPE SimpliVity 380 product as more fully described in the Service features table.

HPE SimpliVity 380 Onsite Software Installation and Startup Service ensures the successful implementation of your HPE SimpliVity 380 hyperconverged infrastructure. Our on-site experts will install and configure your HPE SimpliVity 380 software to jumpstart your investment, support your IT staff, and accelerate time-to-value. This service provides planning, service deployment, installation verification testing (IVT), and an orientation session to facilitate deployment of the features and functionality of an HPE SimpliVity 380 product as more fully described in the Service features table.

HPE SAN Deployment Service provides installation and configuration of your storage area network (SAN). Hewlett Packard Enterprise offers three service levels based on the size and complexity of your SAN environment.

HPE SAN Deployment Service covers a comprehensive complement of technologies, including Fibre Channel (FC), Fibre Channel over Ethernet (FCoE), Fibre Channel over IP (FCIP), FICON (Fibre Channel for HPE XP Storage Array-based mainframe storage), and iSCSI or serial-attached SCSI (SAS), for switches and associated devices. This service implements a new single-fabric or dual-fabric SAN or extends an existing SAN but does not include configuration of arrays or storage devices that are covered by their own corresponding deployment services.

For a smooth startup, HPE StoreOnce Recovery Manager Central Software Installation and Startup Service provides deployment of your HPE StoreOnce Recovery Manager Central software, with features designed to both help ensure proper installation in your storage environment and increase the benefit from your storage investment.

Complementing your new HPE StoreOnce Recovery Manager Central storage software, HPE StoreOnce Recovery Manager Central Software
Installation and Startup Service provides a set of features associated with deployment of your licensed HPE StoreOnce Recovery Manager
Central software products into operation. With the assistance of your designated IT storage administrator, an HPE service specialist deploys
your HPE StoreOnce Recovery Manager Central software as more fully described in this document.

This is a one-day service and provides a limited implementation to help you get HPE Recovery Manager Central Software up and running quickly and to provide a demonstration of the product’s key features using sample or test data only.

This service is applicable only to supported environments. Scripting is not within the scope of the service, but can be accommodated at additional charge (scripting can help enable integration and end-to-end automation within your organization’s environment).

Designed to provide a smooth startup, HPE 3PAR All-inclusive Single-system StoreServ Software Installation and Startup Service provides deployment of your HPE 3PAR storage software, helping to ensure proper installation in your storage environment as well as helping you increase the benefit from your storage investment.

Complementing your new HPE 3PAR All-inclusive Single-system software, HPE 3PAR All-inclusive Single-system Software Installation and Startup Service provides the necessary activities required to help you deploy Adaptive Optimization, Dynamic Optimization, File Persona, Priority Optimization, System Reporter, Virtual Copy, and provide an overview of Virtual Domains and Virtual Lock. With the assistance of your designated IT storage administrator, an HPE service specialist deploys your HPE 3PAR All-inclusive Single-system software as more fully described in the Service feature table.

Deployment of HPE Application Suite, Online Import, Recovery Manager Central, and Smart SAN for 3PAR products are excluded from this service. Separate services are available.

For HPE 3PAR Virtual Copy, this service provides a limited implementation to help you get Virtual Copy up and running quickly and to provide a demonstration of the product’s key features using sample or test data only. The following advanced deliverables are excluded from this service but are available via the HPE Data Replication Solution Service for HPE 3PAR Virtual Copy software:

• Implementation and testing of the HPE 3PAR Virtual Copy software configuration using production volumes or a production application

• Other services that address the unique requirements of your organization, such as verification of multiple applications you have configured; scripting; or integration and configuration of your applications by Hewlett Packard Enterprise, backup environment, or databases (Scripting can help enable integration and end-to-end automation within your organization’s environment.)

This service is applicable only for supported environments. Please refer to additional exclusions in the Service limitations section.

HPE SAN Deployment Service provides installation and configuration of your storage area network (SAN). Hewlett Packard Enterprise offers three service levels based on the size and complexity of your SAN environment.

HPE SAN Deployment Service covers a comprehensive complement of technologies, including Fibre Channel (FC), Fibre Channel over Ethernet (FCoE), Fibre Channel over IP (FCIP), FICON (Fibre Channel for HPE XP Storage Array-based mainframe storage), and iSCSI or serial-attached SCSI (SAS), for switches and associated devices. This service implements a new single-fabric or dual-fabric SAN or extends an existing SAN but does not include configuration of arrays or storage devices that are covered by their own corresponding deployment services.