Do you need low power, high port density 1GbE network adapters for virtualization and server consolidation?
The HPE Ethernet 1Gb 4-port FLR-T BCM5719 Adapter for select HPE ProLiant servers features the next generation of Ethernet integration, offering a single-chip solution in a FlexibleLOM form factor, which offers the option for future upgrades to 10GbE networking speeds. It delivers full line-rate performance across all ports with low power consumption. The adapter is ideal for virtualization, security, server consolidation, network segmentation, and other applications requiring maximum throughput and port density. The total aggregate throughput of 4 Gb meets the needs of customers desiring high bandwidth. The adapter supports advanced features such as Large Send and Receive offload capability, TCP checksum and segmentation, VLAN tagging, MSI-X, jumbo frames, IEEE 1588, HPE Sea of Sensors 3D and virtualization features such as VMware NetQueue and Microsoft VMQ.
Are you looking for extremely high-bandwidth and very low latency communications for your HPE Apollo System and HPE ProLiant DL rack mount server families?
The HPE HDR InfiniBand and Ethernet adapters are designed for customers who deploy high performance computing (HPC) systems with their HPE ProLiant XL and HPE ProLiant DL Gen10 and Gen10 Plus servers in the data center. The HPE InfiniBand HDR/HDR100 and Ethernet adapters are available as stand up cards or in the OCP 3.0 form factor, equipped with 1 port or 2 ports. Combined with HDR InfiniBand switches, they deliver low latency and up to 200Gbps bandwidth, ideal for performance-driven server and storage clustering applications in HPC and enterprise data centers.
Are you looking for an easy and cost effective transition to 10GBASE-T with enhanced security features? The HPE Ethernet 10Gb 2-port BCM957416 Adapters utilize CAT 6A cabling with distances up to 100 meters and is backward compatible to existing 1GBASE-T infrastructure. This allows quick and easy incremental improvement of network speed without either changing the cables or major upgrade of equipment. These adapters help prevent, detect and recover from cyber attacks by protecting applications, data and server infrastructure by authenticating digitally signed firmware via a Root of Trust architecture. In addition, they offer Secure Boot, Device-level Firewall and other advanced security features.
Are you looking for a 100Gb Intel® Omni-Path Adapters for your HPE ProLiant XL and DL Server families?
HPE 100Gb Intel Omni-Path Adapters are designed for customers who deploy High Performance Computing (HPC) systems with their HPE ProLiant XL and DL Server families in the data center. The HPE 100 Gb 1p OP101 QSFP28 x16 OPA Adapter is available today. It is a low-profile PCIe card that supports one QSFP28 port with 100 Gb/s performance. By managing the traffic at a fine-grain Flow Control Digits (FLITs) level, the adapters and switches are able to make extremely granular switching decisions to optimize the performance.
What if you could increase I/O performance and improve network efficiency between HPE Synergy Compute sodules and complex storage environments? Designed for the HPE Synergy Composable Fabric, HPE Synergy 5330C 32Gb Fibre Channel Host Bus Adapter (HBA) connects HPE Synergy Compute resource pools to SANs over 32 Gb native FC fabrics. It provides both high-performance and network efficiency. High performance is achieved through low latency connectivity to HPE Synergy Virtual Connect FC Modules and Brocade® FC Switch Modules while network efficiency is achieved through the HPE Synergy Composer automatically coordinating proper firmware and driver including staging updates to execute and avoid workload disruption
HPE Converged Network Adapters (CNAs) are dual port adapters that provide Ethernet, iSCSI, and Fibre Channel (FC) connectivity over 10 GbE/25 GbE using both Fibre Channel over Ethernet (FCoE) and Converged Enhanced Ethernet (CEE) standards. By consolidating Ethernet, iSCSI, and Fibre Channel onto a converged adapter, HPE CNAs reduce the number of separate adapters and cables required for your data center and also reduce operational, power, and cooling costs while preserving existing Ethernet and Fibre Channel infrastructure. HPE CNAs have also been thoroughly tested with HPE ProLiant servers and HPE Top of Rack (ToR) switches to help ensure a better HPE FCoE solution for your data center.
Is your remote office, department or company looking to consolidate data spread across multiple HPE ProLiant servers into a highly reliable and affordable SAN?
There are many benefits to a consolidated storage strategy. The HPE SN1100Q 16Gb Host Bus Adapters (HBAs) build a Fibre Channel connection when installed into an HPE ProLiant server and cabled to a switch and storage device.
Multiple physical HPE ProLiant servers and/or virtual servers can be routed using a Fibre Channel switch to an HPE storage array such as the HPE MSA, HPE Nimble Storage or HPE Alletra storage devices. This level of consolidation concentrates storage management on one storage device and provides an equally powerful and reliable connection for each server and its applications. Additionally, an onsite data protection device such as a disk or tape backup can leverage the same Fibre Channel infrastructure helping eliminate slow over-the-network backups.
Are you looking for a 4 port 1GbE adapter for your HPE ProLiant Server?
The HPE Ethernet 1Gb 4-port FLR-SFP+ I350-T4V2 Adapter features the next generation of Ethernet integration offering in a single chip solution on a FlexibleLOM form factor, further reducing power requirements for 4 ports of 1 Gb Ethernet. The adapter is the PCI Express 2.1 x4 based on the latest Intel Ethernet Controller I350 designed for use with select HPE ProLiant rack and scalable servers. Its FlexibleLOM form factor means customers now have a choice to meet growing infrastructure needs. It supports advanced features such as Large Send offload capability, TCP checksum and segmentation, VLAN tagging, MSI-X, Jumbo frames, IEEE 1588, and virtualization features such as Intel Virtualization Technology for Connectivity, VMware NetQueue, Microsoft VMQ and WOL, and power management technologies like Energy Efficient Ethernet.
Stuck in network traffic at 10Gbps? Time to take the Express Lane with HPE 25GbE Adapters. Current approaches to managing the increasing data center traffic require higher bandwidth and is cost prohibitive, restricting organizations from easily growing as their needs grow. Legacy technologies are struggling to handle the increased throughput and lack the capabilities to cost-effectively scale. For the rise in volume of mobile data and video and the frequency at which it is accessed, The HPE Ethernet 10/25Gb 2-port SFP28 CX4121B Adapter for select HPE ProLiant Server DL family of rack and HPE Apollo Servers delivers high-performance solutions. It allows Telco, services providers, financial institutions and enterprises to meet the demanding needs of more bandwidth.
Would you like to increase your network’s I/O performance while simplifying the connection between HPE Synergy Compute modules and complex storage environments? Designed for the HPE Synergy Composable Fabric, HPE Synergy 5830C 32Gb Fibre Channel (FC) Host Bus Adapter (HBA) connects Synergy Compute resource pools to SANs over 32 Gb native FC fabrics. This provides high-performance due to low latency connectivity to the HPE Synergy Virtual Connect FC modules and Brocade® FC Switch modules. The HPE Synergy 5830C supports advanced virtualization, security, dual-port isolation, dynamic power management and low CPU utilization features. Provisioning and updating HPC Synergy 5830C are easy, reliable and fast using HPE Synergy software-defined, template-driven, frictionless operation. The HPE Synergy Composer automatically coordinates proper firmware and driver including staging updates to execute and avoid workload disruption.
