Storage Networking

Are you looking to modernize your storage network?

Today’s mission-critical storage environments require greater consistency, predictability, and performance to keep pace with growing business demands. Faced with explosive data growth, data centers need more I/O capacity to accommodate the massive amounts of data, applications, and workloads.

The HPE C-series SN8700C Fibre Channel Director Switch is a director-class SAN switch designed for deployment in small to medium-sized storage networks to support enterprise clouds and business transformation. It layers a comprehensive set of intelligent features onto a high-performance, protocol-independent switch fabric.

The HPE SN8700C Director Switch enables enterprise clouds, transforms large storage networks, lowers operating costs, and deploys Fibre Channel, IBM Fibre Connectivity (FICON), and Fibre Channel (FC) over Ethernet (FCoE) on a single fabric.

IT organizations continue to face unprecedented data growth as more platforms, applications, and users connect to the data center network. In turn, the storage network infrastructure must continue evolving to enable fast, continuous, and cost effective access to mission critical data from anywhere in the world.

To address this challenge, the HPE 1606 Extension SAN Switch helps provide fast, reliable, and cost-effective network infrastructure for remote data replication, backup, and migration. Leveraging next-generation Fibre Channel and advanced Fibre Channel over IP (FCIP) technology, the 1606 Extension SAN Switch provides a flexible and extensible platform to move more data faster and further than ever before.

The HPE 1606 Extension SAN Switch offers up to sixteen (16) 8 Gb Fibre Channel ports and six (6) 1 Gigabit Ethernet (GbE) ports to provide unmatched Fibre Channel and FCIP bandwidth, port density, and throughput for maximum application performance over WAN links.

The HPE 6Gb SAS BL Switch for HPE BladeSystem c-Class enclosures is an integral part of HPE direct connect SAS storage, enabling a shared SAS storage solution.

The SAS architecture combines a P711m, P712m (with cache module), P721m or P731m HPE Smart Array Controller in each server and the 6Gb SAS BL switches connected to supported HPE storage enclosures for SAS storage. The 6Gb SAS BL Switch contains an embedded Virtual SAS Manager (VSM) GUI & CLI interface used to zone, monitor, and update SAS fabric devices

Are you looking for a higher performance embedded Fibre Channel switch option for your HPE BladeSystem c-Class enclosure?

The Brocade 16Gb SAN Switch for HPE BladeSystem c-Class represents the next generation of embedded Fibre Channel switches with 16 Gb/s performance. It hot-plugs into the back of the HPE BladeSystem c-Class Enclosure and its integrated design frees up rack space, enables shared power and cooling, and reduces cabling and small form-factor pluggables. Enhanced trunking support with external switches provides higher bandwidth to enable demanding applications and high density server virtualization. In addition, the 16 or 28 auto-sensing ports support lower bandwidth components for investment protection and an upgrade license enables customers to 'pay as they grow'. The Brocade 16Gb SAN Switch saves space and cost, simplifies the SAN environment, enables easier deployment and management and delivers the performance required for higher throughput applications.

Does your data center need increased switch scalability and performance?

The HPE C-series SN8500C Director Switches elevate the standard for director-class switches. Providing industry-leading availability, scalability, security, and management, it allows businesses to deploy higher-performance SANs, with lower TCO. Layering a rich set of intelligent features onto a high-performance, protocol-independent switch fabric, the switch director addresses the stringent requirements of large data center storage environments. Future ready performance with up to 24 Tb/s of Fibre Channel (FC) system bandwidth and 384 (8-Slot) or 192 (4-Slot) 4/8/16/32 Gb/s, 10 Gb/s full line rate FC ports or 384 (8-Slot) or 192 (4-Slot) 10GbE FCoE ports in a single chassis or up to 1152 (8-slot) or 768 (4-slot) FC ports in a single rack. Ready for integration of future high-speed standards, providing continued investment protection.

Do you need a multiservice switch that supports multiple protocols?

The HPE C-series SN6500C 16Gb FC/FCIP/FCoE Multiservice Switch (Cisco MDS 9250i) is a flexible switch for deploying SAN extension solutions, distributed intelligent fabric services and cost-effective multiprotocol connectivity for open systems. It offers advanced capabilities available only to director class switches. With up to forty 16 Gb Fibre Channel ports, two 10 Gigabit Ethernet IP storage services ports, and eight 10GbE FC over Ethernet (FCoE) ports in a fixed 2U form factor, it is an ideal multiservice switch for department or remote branch office SANs . It connects both existing FC networks and protects your current SAN switch investments. SAN Extension over IP is enabled on the two fixed 10GbE IP storage services ports, enabling FC over IP (FCIP) and compression without the need for additional licenses. Using the eight FCoE ports, the switch attaches directly to FCoE and FC storage devices.

Is there a need to modernize your storage network? The all-flash data center and emerging NVMe storage requires a modern storage network that can keep up with pace of innovation seen with compute and storage resources. The HPE B-series SN6650B 32Gb FC switch is a high-port density building block with 128 Fibre Channel ports that provides the tools to optimize NVMe storage and automate SAN management tasks. It provides 32 Gb SAN connectivity with up to 4 Tbps total system bandwidth for data center consolidation and one of the most demanding all-flash workloads. New automation capabilities enable DevOps resources to automate operations to increase productivity with simple and open automation through open APIs and the Ansible automation engine. The HPE B-series SN6650B enables new insight into NVMe storage fabrics with modern I/O traffic visibility and VM-level granularity to validate and fine-tune performance for better efficiency.

How can you provide fast, reliable, and cost-effective connectivity in the data center with predictable performance and investment protection?

HPE M-series SN2010M Ethernet Switch is ideal for modern server and storage networks. Supporting port speeds of 1, 10, 25, 40, 50, and 100 GbE, they deliver predictable performance and zero packet loss at line-rate. Its unique port counts and half-width form factor allows up to two HPE SN2010M Switch units to be deployed side-by-side for increased density and high-availability in a single rack unit making it the perfect top-of-rack (ToR) switch. Storage-specific features combined with an efficient design provides enterprise-level performance with attractive economics and outstanding ROI. Networks built on Hewlett Packard Enterprise M-series switches are fast, reliable, and scalable while also being affordable. This makes these switches ideal for storage, hyperconverged, financial services, Big Data, and media and entertainment deployments.

Are you struggling to meet the I/O demands of hyperscale virtualization, cloud, or growing flash-based SANs?
HPE B-series SN3600B Fibre Channel Switch provides Gen6 32 Gb Fibre Channel (FC) in an ultra-dense 1U format from 8-ports up to 24-ports, and is affordable for limited budgets. It is capable of replacing three generations of FC with its backward compatibility with 4, 8, and 16 Gb FC for your investment protection. Designed to build a flash-ready infrastructure, it specifically adapts to business application needs. Applications requiring more throughput and lower latency can take advantage of NVMe over FC ready support as well. SAN simplicity is achieved with a simple 3-step install process and SAN deployments with HPE 3PAR all-flash storage are automated using HPE Smart SAN for 3PAR software. Data reliability is enhanced with forward error correction (FEC) by automatically detecting and recovering bit error along with HPE Power Pack+ software maintains efficient SAN-health.

HPE M-series SN2700M Ethernet switches are ideal for modern server and storage networks. Supporting 10, 25, 40, 50, and 100 GbE, it delivers predictable performance and zero packet loss at line-rate across all ports and packet sizes. Enhanced for storage combined with efficient design, it provides enterprise-level performance with attractive economics and outstanding ROI. Networks built on the HPE SN2700M are fast, reliable, and scalable while also being affordable and easy to manage. They support primary and secondary storage, providing consistently fair, fast, low-latency connectivity even under heavy workloads or a mix of different port speeds. This makes them ideal for storage, hyper converged, financial services, and media and entertainment deployments.