Storage Networking

Does your data center need increased switch scalability and performance? The HPE StoreFabric SN8500C Director Switches elevate the standard for director-class switches. Providing industry-leading availability, scalability, security, and management, it allows businesses to deploy higher-performance SANs, with lower TCO. Layering a rich set of intelligent features onto a high-performance, protocol-independent switch fabric, the switch director addresses the stringent requirements of large data center storage environments. Future ready performance with up to 24 Tb/s of Fibre Channel (FC) system bandwidth and 384 (8-Slot) or 192 (4-Slot) 4/8/16/32 Gb/s, 10 Gb/s full line rate FC ports or 384 (8-Slot) or 192 (4-Slot) 10GbE FCoE ports in a single chassis or up to 1152 (8-slot) or 768 (4-slot) FC ports in a single rack. Ready for integration of future high-speed standards, providing continued investment protection.

Are you struggling to meet the I/O demands of hyper-scale virtualization, large cloud infrastructures, and growing, flash-based storage environments? The HPE StoreFabric SN6600B Fibre Channel Switch is a high-performance, ultra-dense, highly scalable, easy-to-use, enterprise-class storage networking switch delivering Gen6 Fibre Channel (FC) capabilities. It is designed to support data growth, demanding workloads, and data center consolidation in small- to large-scale enterprise infrastructures. Delivering 32 Gb to 128 Gb performance, industry-leading port density, and integrated network sensors, it accelerates data access, adapts to evolving requirements, and drives always-on businesses. It can scale from 24 to 64 ports with 48 SFP+ and 4 QSFP+ ports, all in an efficient 1U package. In addition, a simplified deployment process and a point-and-click user interface make the HPE StoreFabric SN6600B Fibre Channel Switch easy to use.

How can you provide fast, reliable, and cost-effective connectivity in the data center with predictable performance?

HPE M-series SN2410M Ethernet switches are ideal for modern server and storage networks. They are an ideal top-of-rack (ToR) solution with 10 GbE and 25 GbE or 100 GbE systems with wire-speed Layer 2 and 3 features that delivers predictable performance and zero packet loss at line-rate across all ports and packet sizes. Enhanced for storage with efficient design, it provides enterprise-level performance with attractive economics and outstanding ROI. Networks built on the HPE SN2410M are fast, reliable, and scalable while also being affordable and easy to manage. They support primary and secondary storage, providing consistently fair, fast, low-latency connectivity even under heavy workloads or a mix of different port speeds. This makes them ideal for storage, hyper converged, financial services, and media and entertainment deployments.

HPE M-series SN2700M Ethernet switches are ideal for modern server and storage networks. Supporting 10, 25, 40, 50, and 100 GbE, it delivers predictable performance and zero packet loss at line-rate across all ports and packet sizes. Enhanced for storage combined with efficient design, it provides enterprise-level performance with attractive economics and outstanding ROI. Networks built on the HPE SN2700M are fast, reliable, and scalable while also being affordable and easy to manage. They support primary and secondary storage, providing consistently fair, fast, low-latency connectivity even under heavy workloads or a mix of different port speeds. This makes them ideal for storage, hyper converged, financial services, and media and entertainment deployments.

How can you provide fast, reliable, and cost-effective connectivity in the data center with predictable performance and investment protection? HPE M-series SN2100M Ethernet switches are ideal for modern server and storage networks. Supporting port speeds of 1, 10, 25, 40, 50, and 100 GbE, delivering predictable performance and zero packet loss at line-rate across each port and packet size. Enhanced for storage combined with efficient design, it provides enterprise-level performance with attractive economics and outstanding ROI. Networks built on HPE SN2100M are fast, reliable, and scalable while also being affordable and easy to manage. It supports primary and secondary storage, providing consistently fair, fast, low-latency connectivity even under heavy workloads or a mix of different port speeds. This makes them ideal for storage, hyper-converged, financial services, and media and entertainment deployments.

Is there a need to modernize your storage network? The all-flash data center and emerging NVMe storage requires a modern storage network that can keep up with pace of innovation seen with compute and storage resources. The HPE StoreFabric SN6650B 32Gb FC switch is a high-port density building block with 128 Fibre Channel ports that provides the tools to optimize NVMe storage and automate SAN management tasks. It provides 32 Gb SAN connectivity with up to 4 Tbps total system bandwidth for data center consolidation and one of the most demanding all-flash workloads. New automation capabilities enable DevOps resources to automate operations to increase productivity with simple and open automation through open APIs and the Ansible automation engine. The HPE StoreFabric SN6650B enables new insight into NVMe storage fabrics with modern I/O traffic visibility and VM-level granularity to validate and fine-tune performance for better efficiency.

How can you provide fast, reliable, and cost-effective connectivity in the data center with predictable performance and investment protection?

HPE M-series SN2010M Ethernet Switch is ideal for modern server and storage networks. Supporting port speeds of 1, 10, 25, 40, 50, and 100 GbE, they deliver predictable performance and zero packet loss at line-rate. Its unique port counts and half-width form factor allows up to two HPE SN2010M Switch units to be deployed side-by-side for increased density and high-availability in a single rack unit making it the perfect top-of-rack (ToR) switch. Storage-specific features combined with an efficient design provides enterprise-level performance with attractive economics and outstanding ROI. Networks built on Hewlett Packard Enterprise M-series switches are fast, reliable, and scalable while also being affordable. This makes these switches ideal for storage, hyperconverged, financial services, Big Data, and media and entertainment deployments.

Are you looking for a high performance Fibre Channel switch for the modern storage area network? The HPE StoreFabric SN6610C Fibre Channel Switch delivers 32 Gbps Fibre Channel (FC) switching providing high-speed FC connectivity from the server rack to the SAN core. It empowers midsize, enterprise and large enterprises that are rapidly deploying cloud-scale applications using extremely dense virtualized servers, providing the dual benefits of greater bandwidth and consolidation. The switch offers state-of-art analytics and telemetry capability built into its ASIC platform. For increased flexibility, the HPE StoreFabric SN6610C Fibre Channel Switch scales from 8- to 32-ports. Additionally, investing in this switch for the lower-speed (8 or 16 Gbps) server rack gives you the flexibility to upgrade to 32 Gbps performance in the future.

Are you looking for a high-speed Fibre Channel connectivity for All-Flash arrays? HPE StoreFabric SN6620C Fibre Channel Switch delivers 32 Gbps FC switching providing high-speed FC connectivity from the server rack to the SAN core. It empowers small, midsize, and large enterprises that are rapidly deploying cloud-scale applications providing the benefits of greater bandwidth, scale, and consolidation. The switch allows seamless transition to Fibre Channel Non-Volatile Memory Express (FC-NVMe) workloads whenever available without any hardware upgrade in the SAN. For flexibility, the HPE StoreFabric SN6620C Fibre Channel Switch scales from 24-48 ports. Additionally, investing in this switch for the lower speed (8 or 16 Gbps) server rack gives you the flexibility to upgrade to 32 Gbps performance in the future.

The HPE 8/24 8Gb FC SAN switch addresses the needs of SMB organizations as well as large enterprises by functioning as a standalone core switch or as lower-cost edge switch in large core-to-edge tiered storage networks.

The 8/24 FC SAN switches provides unprecedented investment protection. Auto-sensing ports that support backward compatibility with 1, 2, 4, and 8 Gbit/sec devices significantly reduce deployment complexity and costs, while providing compatibility with installed devices. Organizations that do not require 8 Gbit/sec interfaces can populate the new switches with 4 Gbit/sec SFPs, while preserving their ability to easily upgrade to 8 Gbit/sec SFPs in the future.

The 8/24 SAN Switch with 24 enabled ports may be deployed as a full-fabric switch or in Access Gateway mode, which provides connectivity into any SAN. Access Gateway mode utilizes NPIV switch standards to present Fibre Channel connections as logical devices to SAN fabrics.